wyovino

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: BeoLab 8000 MK1 Problem #21083
    wyovino
    BRONZE Member
      • Topics Started 1
      • Total Posts 6

      After thorough cleaning of the left speaker, both speakers started working. Now the left speaker will work for about 20 seconds and then stop. If I move the switch on the back it will work for another 20 seconds.

      I think it’s time for the trash bin. I’ve had the console repaired twice by B&O to the tune of over $900 each time.

      Update, yet again. It appears to be a problem with the console, not the speakers. If I plug in a source to the “line In connection it works without issue.

      in reply to: BeoLab 8000 MK1 Problem #21080
      wyovino
      BRONZE Member
        • Topics Started 1
        • Total Posts 6

        Nevermind, I got it!

        in reply to: BeoLab 8000 MK1 Problem #21078
        wyovino
        BRONZE Member
          • Topics Started 1
          • Total Posts 6

          I have the fabric off and all of the screws removed. I can’t even get started with the separation. I’ve tried a small flat screwdriver and a drywall knife but it doesn’t budge. Am I in the right place – between the yellow and green arrows in the attached photo?

          in reply to: BeoLab 8000 MK1 Problem #21020
          wyovino
          BRONZE Member
            • Topics Started 1
            • Total Posts 6

            That helps, thanks.

            in reply to: BeoLab 8000 MK1 Problem #20971
            wyovino
            BRONZE Member
              • Topics Started 1
              • Total Posts 6

              Thanks for the quick reply. I’ve tried to find the YouTube video referenced in the thread – Pyramid Audio, but that channel only has Bollywood films.

            Viewing 5 posts - 1 through 5 (of 5 total)