[WoodyWood61]

just to let you all know, since a couple of weeks I have very similar symptoms and “experimental results” cyberc… I somehow “feel” the TV (BeoVision 11) is the problem – when recanning if often says “missing” and sometimes it crashes, it the BV shuts down and then, at least for a while, the problem is gone!

Another, possibly related, issue: one of my BL5’s needs a new Chassis (clicking noises, other noises, hardly any <100 Hz sound. I only mention this as the BL18 WISA problems began possibly around the same time the BL5 problems began…. (before that, my WISA connected BL18’s worked fine for years).

Anyone?

Rene

[WoodyWood61]

Thanks – unfortunately this speaker starts calibration with sticking out the microphone, but that stops halfway, i.e. it won’t extend completely and the calibration doesn’t really begin… Probably related to the chassis problem?

[WoodyWood61]

Correction: the scart into BV11 part above is incorrect – that was when I had a BV10. The rest is still correct, i.e. only the BV11 side of that cable had been replaced by DIN, the other part of that cable still is scart! (I guess I can replace the rca-scart and scart-rca and rca-din adapters with just a single female scart – female din for my current Beogram 7000 line-up and a simple rca-female scart adapter for the new TT).

thanks to Oliver for flagging that the BV11 doesn’t has scart 🙂
Rene

[WoodyWood61]

Hi Oliver – thanks! I checked and you are correct, no scart but din on BV1, see picture. Seems the connection I described was the previous one with a BV10 that did have scart. I still however have a din-rca followed by rca-scart-in(3x)-scart-out adapter, i.e the one end of the cable to the BV11 is still scart!

I guess when my B&O dealer replaced the BV10 with the BV11 they simply exchanged the BV end of the cable with a DIN plug… (it’s been 10 years….). i will edit my posting thanks to your kind remark!

ps: not sure worth bothering / the effort to get rid of the now obviously unnecessary scart adapter; the cables as they are now are very tightly assembled/tucked away by the B&O folks – so the non-BV11 end of the cable simply has a scart connector….I guess a single scart-din (female-female) adapter could replace the din-rca and rca-scart + 3scart-scart (that latter being legacy of having yet another scart connected analog source).

thanks, Rene

[Author]

Posts