[Viking]

My problem is solved!!?

the reason for the problem was very simple. (and a bit embarrassing for me?)

I had made all the electrical connections in the cable correctly, but I had assembled the mini DIN connector wrong. The inner part with the pins was not placed correctly in the housing, so the pins did not make contact to the sockets in the BeoVision.

After adjusting this, it works fine!

Thank you all for your inputs.

/Viking

 

[Viking]

Hi Madskp

The output from the preamp is 5 pin DIN and i have connected to pin 2 ( Gnd), pin 3 (left) and pin 5 (right).

the S/P DIF parameter for the source AV is set to “NO”.

I actually also tried to set This parameter to “YES”, and then connected the output from the preamp to a A/D converter, and from This to the S/P input on the BeoVision.

this worked, but with much distorsion, of bass and treble, at times with much sound level in the music.

I guess, that the dynamic sound range was to high for either the A/D converter or the S/P input in the BeoVision.

I therefore returned to trying the AV input.

regards

 

[Author]

Posts