Vedet
Forum Replies Created
- Posts
-
Good afternoon!
I can’t find in the B&O App how to disconnect from the wi-fi network and connect to another wi-fi network Beosaund Emerge. During the initial setup, everything is clear, I chose the equipment, setup, connection. And in the working order, I can not find how to switch to another network. Or do I have to exit this setting completely and configure everything again?
You have a whole entertaining story with the replacement of equipment. But despite the fact that Google is pursuing its goals, the replacement was clearly a step forward in stability and speed, which means it was worthwhile.
Thank you for such a detailed presentation and attention shown to my question.
Thank you for your attention to my question.
Can you tell me how the speed level changed in your first case when routers and Mash systems were used? Has it grown or remained at the same level, but has it become more stable?
Здесь нет проблем с ячеистой сетью 802.11ac (2 Linksys Velop)
Thank you, your information inspires additional confidence.
По сути, подключите каждое устройство спутниковой сети к вашему оборудованию Hifi / TV и позвольте сетям обмениваться данными между собой (очень высокая скорость передачи), но при этом взаимодействовать с вашим телевизором / Hifi по кабелю. Не используйте встроенные приемники Wi-Fi в устройствах Hi-Fi / TV. В каждом сетевом блоке обычно будет от 2 до 3 портов локальной сети.
Thank you for the very valuable information for me.
I didn’t know that it was possible to connect a Mash satellite via cable to my media center, and already connect it via HDMI to TV, whereas the main router connected to fiber will be connected to its satellite via wireless mash communication. Now I will know that this way you can achieve a more stable connection and maintain the speed level.
Я был тем, кто упомянул об этом в подкасте
Good afternoon!
I am very glad that you answered my question. Your podcasts always provide comprehensive information and are very interesting. Now everything became clear. Thank you for your clarification and prompt assistance.
Thank you for your attention and such a detailed answer. Your advice are very valuable to me. I realized that you basically have a cable connection. And yet you reported that mesh Wi-Fi is working stably. It follows from this that you do not confirm the information that Mesh networks do not work stably with B&O equipment, if I understand you correctly?
Спасибо. Другими словами, любые настройки телевизора LG: контрастность, яркость, резкость, масштабирование и другие возможны с помощью пульта дистанционного управления BR1, но только если он подключен к аппаратуре B & O. Или с помощью BR1 можно настраивать только звук и источники, а настройки изображения телевизора LG возможны только с пульта дистанционного управления LG?
Вы можете перемещаться по всем меню телевизора LG с помощью Beoremote One. Некоторые опции, доступные в виде прямых кнопок на пульте дистанционного управления LG, будут доступны в меню списка на Beoremote One.
Thank you. Your answer was very valuable and helped a lot.
Thank you. In other words, any LG TV settings: contrast, brightness, sharpness, zoom and others are possible with the help of the BR1 remote control, but only when it is connected to B&O equipment. Or using BR1, it is only possible to adjust the sound and sources, and the picture settings of the LG TV are possible only from the LG remote control?
Good afternoon! I would like to clarify whether BR1 is paired only with B&O equipment, in this case Stage, connected to an LG TV, or can be paired separately, without B&O equipment, only with an LG C3 or G3 TV, for example, to control TV settings by downloading the B&O App to the software providing an LG TV to pair the BR1 directly with the LG TV itself?
Many thanks to you for such a detailed answer. Now I will know how to do the right thing.
Thank you, did I understand correctly that when pairing via Bluetooth, as the only correct one, the connection between the remote control and BS Emrerge should remain stable during any movement around the house? And I can control BS Emrerge from anywhere in the house using the BR1 remote? And the second point, I am a beginner, and I would be extremely grateful and grateful to you if you would write the BR1 connection procedure using the B&O App in more detail step by step.
Thank you for your attention to my question. As far as I understand, pairing can be established in two ways: via Bluetooth and using the B&O application. The version of my B&O App is 5.2.0.230808 -48327. The last update was from 08.08.2023, but I could not find Beoremote BT One in the application. It only has Beremote Halo. Therefore, I have paired with BS Emerge using Bluetooth. Can this be the reason for the pairing break, if “YES”, then how do I pair through the application if there is no BR 1 in it?
Hello! The BeoVision Contour TV is combined with the LG C3, model 2023 and supports the latest technology of wireless transmission of multi-channel audio WiSA. With its help, you can broadcast sound from the TV to compatible WiSA speakers (at the moment Klipsch, Bang & Olufsen, Axiim, Enclave Audio already have it). At the same time, we are talking not only about standard 5.1 sound, but also about modern formats, including Dolby Atmos. The Summit technology used in WiSA supports multi-channel audio without compression (up to 8 channels). According to WiSA, the sound transmission quality is 20 times higher than the capabilities of Bluetooh and Wi-Fi technologies.
Thank you for such a detailed, clear and informative answer. This helped me a lot, since none of the instructions reflect this. I congratulate you and your loved ones on the Bright Resurrection of Christ – Easter.
Very cool! Tell me in more detail how do you use BR one? How do you synchronize the selected list of radio stations in the application with the remote, do you switch radio stations from the remote? The selected radio stations, for example B&O radio in the application, are synchronized, reflected on the remote display and when you press the “music” button, you can see the list of radio stations from the application on the remote display and change them using the arrows of the BR one remote? Or is it happening in some other way?
Tell me, in the case of replacing the grid with fabric on wooden grille (oak or walnut), will this drop-shaped LED be a technical obstacle to these actions, will it prevent them from getting up without interference, or perhaps they will close it and this will create certain difficulties.
Thank you, this is a very valuable addition. I didn’t know about this detail.
Thank you for your attention to my interest. I looked through this thread. From it it is clear that the Beolab 8002 was produced in 2010-2012, but I did not find information about how to identify it by serial number. Perhaps someone has a Beolab 8002 or someone has information about exactly which serial numbers this speaker had in 2010-2012 or which number the Beolab 8002 line began with in 2010? I would be extremely grateful for this important information for me.
