Totz

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 7, 2023 at 8:16 pm in reply to: BG 5500 Arm string ankers broken #18754
    Totz
    BRONZE Member
      • Topics Started 1
      • Total Posts 5

      Thanks for your good suggestions. A simple bolt and nut worked perfectly as well. Just be careful while taking the two gliding elements out of the plastic fixtures to install the bolt. These could become brittle with age? Follow the instructions to reinstall the string properly thereafter and it works well!

      February 13, 2023 at 11:17 am in reply to: BG 5500 Arm string ankers broken #15802
      Totz
      BRONZE Member
        • Topics Started 1
        • Total Posts 5

        I think I take this back. Looks like the pictures are pretty well the same as for the 7000.

        My only challenge will be to bring the small screw into the proper place from underneath! Not much space and I do not dare to ‘work’/lift that part of the arm.

        But thanks again!

        Erich

        February 13, 2023 at 11:02 am in reply to: BG 5500 Arm string ankers broken #15801
        Totz
        BRONZE Member
          • Topics Started 1
          • Total Posts 5

          Thanks a lot for your efforts, Christian. Unfortunately th BG 7000 differs probably considreably from my BG 5500.

          February 8, 2023 at 9:29 am in reply to: BG 5500 Arm string ankers broken #15561
          Totz
          BRONZE Member
            • Topics Started 1
            • Total Posts 5

            Thanks a lot very helpful. Challenge will be to put a small screw and bolt (best?) into that hole as an alternative to the missing/broken plastic part (as it probably was). Can you easily lift the gliding part from the 2 trails for easy access? Or do you have to remove these first as well?

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)