Stoobie
Forum Replies Created
- Posts
-
I think this is the part Carol is having difficulty with from the user manual :-
If you have a B&O product with 20 fixed FM channels, each channel must be set to 90.0 MHz. Consult the B&O manual for help setting the FM channel at 90.0 MHz.
It only needs to be done once and is a tedious process, but necessary. If you have a B&O product with 99 fixed channels and want to use 99 Internet channels, it is a difficult process, but it only has to be done once inconnection with setup. We’re sorry, but that’s the setup.
It seems the product uses the 90.0MHz to “broadcast” to the B&O radio.
Stoobie
I was wondering if you could use some of that inkjet printable water slide decal paper to print the red lettering on to the straps. The decal paper you can use to make transfers for models. Available on the usual online sites.
Stoobie
Does your TV not have this connection panel top, center on the back? You press it to open.
Stoobie
Does your TV have this panel in the middle on the back. You press to open.
Stoobie
This is news to me. Some Beo4s can do this and some cant? I performed the region change on a DVD2 a few years ago with the Beo4 that I was just using at the time on a daily basis. I suppose the good news here is that I still have this Beo4 (I think!).
You don’t need the “special remote” to make the DVD2 region free. That is done with a standard Beo4 so maybe your remote is not the “special” one 🙁
Stoobie
Hopefully this link works
I’m not sure if they ship your way
Stoobie
Taken from the “version changes screen” on the CT Tools I have installed.
Version 6.84
Features:
– Added BeoVision Avant support:
* Deezer source
* 3 new stands
* Netradio
– Added Deezer source to BeoVision 11, BeoSystem 4 and BeoPlay V1 products.
– Added IRA 8 to IRA list.
– Removed auto-incrementation of sources.
– Removed AV button from zone page on TVs that use Beo5 IR protocol, since they don’t support it.
– Added Get HD PVR STB to Configuration Tool.
– Hid the BLC in zones which don’t contain it. It’s shown only in the zone where BLC is used.
– Disabled drag and drop for hard keys.
– Fixed the bug that caused third party IR to be disabled in certain setup.
– Removed AV button from BeoVision 11, BeoSystem 4 and BeoPlay V1 products.
– Beo6 firmware update 3.40a.
Version 6.62
Features:
– Improved firmware (v3.30a) for Beo6 to overcome unresponsive remotes
– Support for CD play function in BeoSound 5
– Enhanced support for Spotify on BeoPlay A9 and BeoSound 5
– Added Spotify to BeoVision 11, BepPlay V1 and BeoSystem 4 internal sources list.
– Added BeoLab 17, 18 and 19
– Support for BeoSystem 4
– Image for BeoSystem 4
– ATSC module support for BeoVision 11
– Fixed oversized logos
Version 6.56
Features:
– Spotify logo support for BeoSound 5/BeoMaster 5
– Several bugs have been fixed which could lead to corrupted configurations.
Version 6.40
Features:
– Added BeoPlay A9 support
– Added PlayMaker support
– Improved BeoVision 11 support
– Improved BeoPlay V1 support
– Improved user authentication
– Improved 3rd party products support
– Improved support for older Beo5s with new driver
– Improved support for larger fonts in win 7 and win 8
Firmware:
– Beo6 Firmware 3.00a
Version 6.00
Features:
– New USB driver for 64 bit
– BeoPlay V1 support
Version 5.12
Features:
– BeoSound 5 2-way operation
Search the forum. This has been discussed very recently on here. ?
Stoobie
Matador, you inspired me to design new buttons and screens when you posted pictures of your screens in one of the old forums. I love my Beo5s and Beo6s.
It is a pity you cannot get yours to work properly.
Stoobie
With the Beocom 6000 there is an A and V button that you press before using the wheel to change the volume.
I did notice how the dealer was careful to distract viewers from the delay on the screen. But why? No other remote was doing it at the time anyway, so no one was faster.
My fat sausage fingers would be a problem with those small keys. You could probably make them bigger in the configuration tool but that would mean spreading them over more screens, so you’ll need to consider if that is better for you.
Stoobie
My brain doesn’t work that way either 🙂
Hopefully someone can assist
Stoobie
If you go to the BeoWorld main website and look at the top right you will see a link to Beotech. There are loads of wiring diagrams on there that may assist.
Stoobie
Take a look at the video in this link, it doesn’t look like the remote updates very quickly. Is that the same issue as yours?
Stoobie
Your Beo6 has the latest firmware/software and the configuration tool is the latest too. Great that you have it working.
Sorry but I can’t help with the slow connection.
It is VERY important to make sure the Beo6 is fully charged between downloads. The charger is too slow to charge properly so connect back to the mains charger after each download and don’t leave it connected to the USB on the computer for any length of time. If the Beo6 battery dies during a download, it can be very difficult to get it working again.
Stoobie
BV12 question answered in your other post.
Your BeoSound 3000 and BeoSound 4 are MasterLink (ML) but your BeoSystem 4 is not. It is NetLink (NL). To connect ML to your BeoSystem 4 you need a Beolink Conveter NL/ML. These are fairly expensive but could be a good “investment” for full integration if that is the way you are thinkingof going. All my system is the older ML so I can’t really help with NL.
So my suggestion above using “option 5” is an experiment as I don’t have anything to try it with.
Do you have a Beo4 remote? You can use that to set the option easier than the Beo5.
Stoobie
Once again, sorry my reply is in English.
Normally I would suggest you upgrade your membership to access the manuals on here but there doesn’t seem to be anything for your BS4/BV12.
I couldn’t find anything for you BV12 on B&O site either. There is a manual here that talks about the message you are getting.
https://www.manualslib.com/manual/1216849/Bang-And-Olufsen-Beovision-12-65-Mk-Ii.html?page=20#manual
Stoobie
I am not sure what to suggest but I saw this when looking at waht options to set each.
Option 5: Where the product responds to its own codes:
Video – ‘TV’, ‘Sat’, ‘Text’, ‘VCR’, DVD’ etc
Audio – ‘Radio’, ‘CD’, ‘Phono’ etc
You might want to try that!
Stoobie
