pierre69
Forum Replies Created
- Posts
-
Just a little feedback.
It’s been a little bit more than one year since I have made the modification with the heat shrink tube as describe above. My beousound 9000 is still working great. I use it nearly every weekend.
I still enjoy watching and listning to it like the first day.
Pierre
Lesbart, this is exactly the problem.
If I mix MKI and MKIII service manuals, sometimes I can find what I am looking for, but not everytime.
Thank you very much for your help !
This is the document I have got. You can see that some diagrams can’t be read.
I think there is only this version avaible on internet…
Hi all and happy new year !
I have found a service manual for my MKII BS9000. But the quality is really poor… I can’t read several diagrams. Especially the Diagram J
Does anyone knows where I can find a good quality version ?
The MKI and MKIII service manual are too different to be used.
Thanks in advance
Pierre
When I took off the old worn damper on my BS9000, I measured it with my caliper. The outside diameter was 3.60mm.
I forgot to measure it with the heat shrink tube on it. But I think, the diameter is around 4.00mm.
An OD of 4.00mm seems to be the right dimension.
Thank you Matador,
Yes, I will make a feedback in several weeks.
There is one thing I have noticed when I opened the unit, is that the damper was moving freely around the rocker arm. Is it normal? Is it due to the wear? I don’t know. With the heat shrink over it , the damper is more tight on the rocker arm. That’s the only difference.
Will the wear out faster ? I don’t know, time will tell.
For the moment everything is fine.
