[Peter Aalykke]

Hi Billbriscoe

Thanks for answering

I’ll try it tomorrow, and give you a feedback

All the best Peter

[Peter Aalykke]

(Moderator note: Moved from ‘BL3500 and the MCL/PL connector’ thread)

Hi again Madskp

I have also had the thought, that the BL3500 in my absence has been connected to a BEO-Amp via a masterlink cable, and that the BL3500 somehow has been disconnected to the remote control, so that the BL3500 does not respond to any command via the Beolink 1000? Could that be the reason to the fact that I can’t deactivate the speaker to be an inactive speaker with the command MENU, 0,4,PLAY to the state “MCL SEL” ore any other command MENU 00-01-02-03-06 ore -09, PLAY ??

Have a Nice day / Peter

[Peter Aalykke]

Hin again RaMaBo

Thanks for your mail.

I’ve tried the link you have mailed, but I can’t see the photo’s in the link? Have you the possibility to send me a photo of the two SMD capacitors near the U2506 integrated circuit that need to be excanged?

Hope yoy can mail me a photo to peter@aalykke.dk or upload a photo here at the site.

Rearly hope to hear from you again.

All the Best Peter

[Peter Aalykke]

Thanks a lot Madsko – 🙂

[Peter Aalykke]

Thanks for all your help Madskp

I’m affreid this also does not help?

Please, where do you find the service manual with theese OPTIONS commands ?

I’m affreid that there is a problem the IR reciever in my unit? If so, where do I bye a new one, please?

All the best / Peter

[Peter Aalykke]

Hi Madskp

I have tried the double MENU, to see if it is a Mk 2 – but It is NOT. Under the Din connector MCL is engraved.

Earlier no. 2 BL3500 displayed “MCL SEL” when I pressed MENU,0,4,PLAY on the remote, but not anymore – very strange? 🙁

Still hope to find the reason for frosen BL3500 🙂

 

[Author]

Posts