Millemissen
Forum Replies Created
- Posts
-
With a DTS encoded disc, surely can we not just get the disc player to output PCM to a Theatre? I might be missing something, but I thought it was just a matter of choosing which device in your chain does the decode/ unpack of the source signal. So whether the player does, and sends out PCM, or alternatively it sends bitstream (i.e no decoded) onwards should not really make any / much difference. Obviously with a Theatre not doing DTS-X, one would need to get the media / disc player to do the job and just send out PCM. Or am I missing something?
Sadly that is not quite the case with (UHD)bluray players.
Some of these do decode DTS, however they just put out a 2 channel signal (aka stereo).
And even worse, you have to dig deep into the specs to find out, if they do multi channel output or just 2 channel.MM
I hardly ever see or use the LG menu/OS (after having set everything up).
And I am not interested in a workaround.
However, since the screen mutes when you go from a video source to an audio source (e.g. B&O Radio), it must be possible to do this….and create an entry in the List for it.We’ll see – in any case I will put that on my ‘wishlist’ for the support.
MM
Muting the picture would be for when you listen to music, that comes from a video source e.g. a Bluray Player or the ATV/Apple Music….
…..and just want sound.This was part of previous BV’s, called ‘P.Mute’.
I can imagine that this will be hard to achieve with the seperated LG screen – nonetheless I asked…..just in case there should be a solution.
MM
Is there really no user manual for the Theatre and app?
—————
As far as I am aware there is no dedicated manual (yet).
However, you can learn a lot about how the Theatre works reading the articles in the blog of Geoff Martin………
…..starting here/86:P.S. The app is still a work in progress – a manual for this would have to be edited many times in the coming months.
You can find a lot of hints to setting up Listening Positions in this thread.MM
Do you know that you can move/reorder the entries in the List (that is, if your Beo4 supports that).
Moving A.Aux to the first place there would make things easier.
MM
You should set all speakers (with such a setting option) to free.
This is how they were measured in Struer, before adding the values to the BS Theatre for the Room Sense process.A BL2 (or any sub) should be connected with its own PL (with no daisychaining to other BL’s).….otherweise the BS Theatre will not know which values to use, when Room Sensing.
According to the BL2 manual, it should be set to 3, since it is connected seperately to the system:
“If you have a Dolby Digital system, and
therefore no speakers are directly connected to
BeoLab 2, we recommend that you set the
SETUP switch to 3”.MM
One of my ‘speaker/listening options’….
The BS8 is nowadays just the speaker for an Essence MK2.Here joined in to what plays in the livingroom.
Shottish Winter/Christmas music ☃️?
MM
But it would be nice to be able to control it from the app…
————
Even nicer would be to control it with the Beoremote!
Also I want to be able to assign a certain Listening Position to this device/the CD there.I know…….you can probably start it on another device and then Join in on the Theatre.
But that is just a workaround – not the real thing.I’ll have to include this in my feedback for the Theatre to the team, once I have a few more ‘missing things’ together.
If this is a ‘Mozart-thing’, I am wondering why not anybody else has noticed……or maybe most people do not have a NL/ML Converter?
MM
Anyone knows how to mute/turn off the picture/screen on an LG/THEATRE combo using the Beoremote One? I haven’t come across any options yet (not on remote nor in the app). MM
————
Really noone???
Additional question.
How do I access my CD6500/Master6500/NL/ML Converter on the Theatre?
This was possible with my previous BV Avant 1.st gen setup.
And it is accessable from my other (ASE) Network Linked products.
There does not seem to be a menu on the Theatre for this.
Is this a ‘Theatre-thing’, something that has not yet been implemented or is it a general ‘Mozart-thing’ (a bug, then)?N.B. Beolink is activated in the Theatre menu!
Here is how it looks in the setting for one of my Essence boxe’s:
Get a Beolink 1611 Converter…..and you are good to go.
MM
Does anyone know if it is possible to set a volume level when changing source? I know there is the default volume setting when you turn it on, but I would like to have different levels when I change to the various HDMI ports
————
Only way I know of to set different startup volume values, is to use the MyButtons as the source starter.
However, I also would like to be able to set an individual start up volume for each source (or even for each Listening Position).
When I get an overview of ‘my wishes’ for the Theatre, I’ll include this…..and will send it through the (beta) app to the support team.
You could do the same….the more the better.MM
Anyone knows how to mute/turn off the picture/screen on an LG/THEATRE combo using the Beoremote One?
I haven’t come across any options yet (not on remote nor in the app).MM
I would like to be able to stream audio to the Horizon, while the Horizon is turned off. Ideally via Spotify Connect, but anything else would be a fine substitute. Not sure that’s doable though with any of the solutions you lay out? Also, I don’t think the B&O APP supports streaming to non-B&O Spotify-Connect implementations?
—————
The Horizon will have to be on…..that is the brain of the setup.
However, if I am not mistaken you can mute the picture, when just listening (I know….an additional step, but doable).Spotify Connect is not a fully integrated part of the Bang & Olufsen app – choosing Spotify will always redirect to the Spotify app.
So no matter which Spotify endpoint/receiver you use, you will have to use the original Spotify app.Tip: If you airplay from the Spotify app to the ATV box (assumed this is Puc-controlled), you will be able to play/pause and skip tracks with the Beoremote.
MM
oh boy I want to avoid doing that as its a mess and I want the TV to get software updates. Something else I don’t know if it is a bug or not… I have the theatre connected to the LG by the special ethernet TV port. The B&O app on the TV says it’s connected fine and using any internet services on the TV also works fine. The weird thing is in network setting on the LG it says ethernet is disconnected (and wifi is set to off). Anyone else have this?
—————
I won’t be able to say much about that (and the notifications), since my goal is to see as little of the LG/WebOS as possible.
I use (as previously with my Avant 1st gen) the ATV4K box, a (UHD/SACD) Bluray player, a Chromecast Ultra dongle, all connected to the Theatre/HDMI…..and from the LG occationally the build-in tuner.
How well that will succeeed, I won’t be able to tell until after a few more days of use (did not quite finish the install yet).Those, who want to use the apps on the LG will have a hard time to get rid of all unwanted stuff, I guess ☹️
P.S. The tv – of course – is connected with the ethernet cable from the Theatre……..I want the tv updates, too – and the control of the LG/UI, if needed.
So far no issues with network notifications like you described.MM
my Theatres are being installed in 3 weeks time, both wall mounted. The installers have a lot of wiring going into the back of my living room theatre – lord knows how they’ll make the whole thing perfectly flush to the wall! Gaps will not be tolerated! Congrats by the way, and enjoy.
—————
Will be interesting to see how good they will get it.
The pic (from the install video) shows some, but not much space behind the wallmounted Theatre.
My own tablestand (with the SMI) mounted combo standing on a lowboard is pushed as far as goes against the wall…….not much space there either.
And no way to get the rear cover in place.MM
ok im THRILLED someone posted the tip on how to get rid of the LG logo on shutdown for the G2. Can anyone figure out how to get rid of the notifications the TV gives you about sports and app updates? I get 4 popup notices every time the TV turns on and its annoying.
—————
Maybe this helps (go to 9.00 ->)
MM
The Horizon is what it is – you can complain about it or not….it won’t change anything.
I’d follow the advice from the dealer, to add an AppleTV…..maybe a Chromecast (or both).
I’d say, make the best of what you have!
If you need Spotify just cast to the Chromecast dongle.
On the AppleTV you can install the Spotify app…..this works well as a Spotify Connect receiver.
Also there are also small Spotify Connect capable devices, that you could connect to the analog line-in of the tv.Streaming your own DLNA/NAS based content (if you have such) can be done using one of many apps on a mobile device to cast or airplay.
(I know….this is not “Moment-like”, but the option of listening to music is there).As you know – you can still have internet radio, when the Moment is integrated with the Horizon.
MM
yikes! wired all the way, but that is fairly cramped! Did you do it yourself?
=====
Sure, but haven’t finished it yet.
The fun part (of making Listening Positions) will have to wait untill tomorrow.
Also I am looking for a way to get rid of the WebOS logo at startup.I do wired whenever I can, but it seems that the Theatre was not quite designed for wire guys.
Guess what…….I left the back cover off – no way to make that fit ☹️
Since the unit is placed right up against a wall, I don’t see it anyway.MM
To my knowledge there are no ‘position’ settings on the 6000.
https://bangolufsenassistentgohe.blob.core.windows.net/manuals/SPEAKERS/BEOLAB_6000/beolab6000_userguide_english.pdfHowever, on the 6002 there are.
Any Beolab with these setting options should always be set to ‘Free’.
This is how they were measured for the Theatre.MM
