mbm1968
Forum Replies Created
- Posts
-
Hallo Moskito,
danke für den Tipp. Jetzt schein es zu funktionieren.
Was ist da das Problem und was mache ich, wenn ich Homemedia wieder einbinden will?
VG
Micha
Hallo Moskito,
anbei die Quellen des BeoSystem 4.
Ich müsste auch beide Geräte je auf Option 1 gestellt haben.
VG
Micha
Hello Stoobie,
thx. When I understand you wright, so I have to create 2 zones. One for video and one for Audio. And the put everything in the associated zone.
I will try the.
I have also a BeoSound 4. So I have to look which one I can connect to Beosystem 4 and how.
Do you have an idea what the BV 12-65 message means: “screen not measured. contact the installer…”
Have a nice weekend.
Hi Stoobie,
thx a lot for helping.
One more question. Where do I connect the 3000 to the 4?
I’ve a masterlink to rj45 cable, but which socket must I take?
Mike
Hi Stoobie,
I’m now running a VM with Win7 32-Bit at it works. THX for the tipp,
I’m tried to program the Beo5. Now I have the BS4 in one zone and the BS3000 in other zone.
The problem now is, that when I will start a CD the BV 12-65 turn on two ;-).
Just another question you might able to answer:
When I have a Powerlink cable with end in a RJ45 is it possible to take a normal LAN-Cable and go from RJ45 to a Powerlink plug?
Mike
Hello Stoobie,
thx for answering.
The BS3000 is not connected to the BS4.
But I not sure if I can reach the Beo5 from my PC. I’m running Win 10 and I have a driver problem.
The Beo5 is connected (Control panel)
If I understand you wright it is not necassery to add the BV12-65.
So I will add BS4 and BS3000 andthe speakers in one zone and then check if the remote works with the components.
Michael
Hallo Stereomensch,
Danke für die Antwort.
Ich habe keinen B&O Plattenspieler.
Das ist ja mein Problem, dass es nur einen AUX Anschluss gibt. Ergo entweder Plattenspieler oder Bluetooth. Macht aber auf Zeit gesehen keinen Sinn wenn du jedesmal die Beosound 4 zerlegen musst um das andere anzuschließen.
