[didifart]

So, here’s the video : https://youtu.be/lVNNq7JGhV0

 

[didifart]

Hi all.

So , I will answer myself as it can be usefull for anyone having the same issue.

I found that the 8vREF signal was around 17mV and not 8V. This 8VREF is used on 2 opamp, on the lm3915 of the vu meter and …as a voltage reference on the LM1131 dolby chip. From the schematic, i suspected a faulty capacitor (C417 on dolby PCB) and… I was right. It was short cut so i swapped it with a brand new one and everything works fine now!

 

[Author]

Posts