Carolpa
Forum Replies Created
- Posts
-
That should be possible – that is what the line-in connection there is for.
So that’s a: “that’s possible”.
However – like if you’d connect to an M3 – there is no control of the turntable there.
Correct: I have a BG4000 (with pre-amp) LINE-In connected to a BLC.
P.S. I find it cool to be able to control the Beogram remotely – why not just keep the 6500Master….you can hide it in a cupboard or so. MM
True, but I had a BG7000 connected to a BM7000, BLC connected, and noticed I hardly, better said never, started the record player remotely. I always pressed the play button after placing a record. So cool feature, but presumably hardly used.
Where’s that? Can’t for the life of me find a supplier in Belgium. Only option seems the be the one seller on eBay who charges 60 euros a piece now
ask him for his best price.
Streaming to B&o:
I use Audirvana in combination with Qobuz.
Qobuz is intergrated in Audirvana (as is Tidal). B&o devices are UPnP music out-puts in Audirvana; devices to stream to. So I use one Beosound to stream Qobuz hires music to and JOIN other B&o to my needs.The format streamed by Audirvana is WAV/PCM.
To me, your posts on BL NL/ML are the reference user guide for the device. Enjoy the remainder of the weekend. Lawrence
thx, much appreciated
This morning all three of my BeoLink NL/ML converters – each in a different room and with separate power and Ethernet connections – are offline. I can’t even open the webpage to reach them. They were working fine earlier this week. Has anyone else experienced the same?
Several BLC’s are ONLINE and reachable.
advice: I would restart the router.
Only, I can’t select the A9 speaker in multiroom from the moment tablet ? I can only use the multiroom with the B&O app.
this feature has never been available on the Moment.
if the A9 plays f.e. Music the Link is shown (if both are in the same network) on the Moment. Then by selecting the A9 in the Link page, the Moment joins the A9.
The opposite: selecting the A9 to join on the Moment tablet is not possible. You need a remote, the app or join manually for the A9, if the Moment is playing something.
Note: this was normal behaviour when NL was introduced; every device could manually join other NL devices. This was the method for the Moment.
the Halo doesn’t control the Theatre?
not correct, it actually does!
sorry MR10%, I saw your photo’s after I logged in to post mine.
When playing records from my Beogram 7000 wired up to my Avant 55 and then over multiroom to my Beosound Balance pair in another room, it works perfectly to start with, but cuts out after about 10 minutes each and every time. Any suggestions for a fix would be most welcome!
energy saving active?
or the Beo4 is set to continuously control a device set in option 4.
then search for “config” in list of the Beo4 and type “2002” to reset the Beo4 to normal functionality.
leave the Moment Hub off the Soundheart until it’s battery is drained completely.
put the Hub back on the Soundheart and follow bnousr 6 steps.
edited:
wait some time to let the battery recharge a bit.reset the the Hub (see above) with a pin/paperclip.
strait answer: yes….. but
you will not have all (additional) functions available with the Beo4 and depending on your Beo4 (with or without joystick) the operation can be different than expected.
Morten, I can’t see the version beyond 2.5.3… so I assume it is 2.5.3.131. I do run LC3+. I see it was upgraded fairly recently so maybe the dropouts I recall are from before the upgrade. I’ll keep this in mind. Thanks for the information. Stan
to see the builds goto the “men” icon in the right above corner, goto chose Support, then Setup overview. Select f.e. the Balance: the sw version complete with build is shown.
Apologies but the BLC converter service manual is not in either the old or new manuals library. If your correct membership status is not showing please send Keith a PM asking him to update.
I have a Dutch BLC service manual…. and I think I downloaded it from this site…..
So if it is gone lost I can send you a copy.If someone really wants to integrate the Beosound 5 to the setup (with ML and NL), the BS/S5 is the way to go. P.S. I have never heard a fan in the BM5 and the box can be hidden away. MMBut….. if one use a BS5 or a BS5e one can change the source with a remote, to change a Radio Station or an Album (DLNA collection) you still have to physical go to the BS and set the station or Album. Independently if it is linked in NL or ML or Line In connected to a BLC.NB: I know there is a Beo6 , I have one. A really nice remote but not really working with a larger collection. With other words IMO not a solution in a NL or ML system.@Carolpa Sure, that will work…..has been done with different devices several times. That is pretty easy! But I did not understand that that was meant. ’Adding’ something/the Encore to a BLC should also mean being able to use and control the individual sources (of the Encore) within the NL/ML setup. MM
Several years ago I tried the usb of both, BLC and BS5e, in search of access to the BS5e. No luck…. presumably or better surely the lack of the correct software.
the BS5e was and is a very closed system in B&0 terms
’….feed an Encore into a BLC’ – that sounds like an interesting project, since the Encore has no ML or alike
MM
quite easy!
Buy a PL to Line In cable. Connect the PL of the BS5e Line in to the BLC.
I connected the BS5e to my BS9000 BLC. Set to volume to approximate 90%, then it works just fine!Pity I can not reprogramme the LINE IN to another name.
I am still under the impression, that originally B&o had the intention to use the BLC as BS5e and NL in between. But it never happened (as with the latest BV7, the Essense mkI)
@bnousr, you’re welcome.Here’s the network topography:
just to be precise: the connection BS5 – Beolink Converter NL/ML (BLC) is not a NL (Network Link) connection.
I would try Stefan’s alternative:
BS5 – NO AUDIO master
BS3000 – option 0
BLC set as V.Master (with connected IR eye if remote is nesessary); set visible to NL : cd, radio, n.radio, n.music (with IR eye set the IR mapping)additional option; but with a total different setup outcome
Beoplay A6: goto settings/beolink/link to other products; set primary product as BLC
Beoplay A6: goto “your sources” or “your content” (my settings are in Dutch) / sources/local list; check the sources of the BLC sources.
Now ALL the BLC sources are an integrated source of the A6. You can start a source on the A6 and JOIN the BLC (then optional stby the A6)Kind of interesting having the BS6500 playing using infront of me together with the BL3500 on the wall behind me but yes there is a slight echo but sounds a bit like concert hall effect (then don’t indent to play the speakers on the same time).
connect the speakers to the BLC instead to get rid of the echo.
