[astro]

So, a update, I changed some caps and it got the radio scale light working. Then I checked the output transistors and they seemed fine, all measured the same with the diode tester. But when I put the transistors back the radio sounded great from both channels. And the heatsink is much cooler.

Thanks Martin for the hints!

cheers, Göran

[astro]

Also, the right hand side transistor mounted on the rear heatsink gets varm.

cheers, Göran

[astro]

Hi again! There is a pot (737 in the schematics) that is a bit charred. I think it is related to the channel (right) that is weak and distorted. Is it a good idea to change the caps in this area of the board?

cheers, Göran

[astro]

I changed the three big capacitors, and the sound is great- in one channel. Tried the different inputs too. The other channel is still weak and distorted. Could be a million things I guess, but are there any more common problems? Btw, the tuner is really good, picks up lots of stations.

Cheers, Göran

[astro]

Dillen wrote:

Knob here. The missing channel could be caused by one or more dead capacitors. Martin

Thanks Martin! The big electrolytic capacitors were all leaking, so I ordered some new ones. See if I can order that sliding knob also. Another thing that is broken is the flywheel for the tuning. Theres supposed to be a connecting plastic cog which has disintegrated. I guess that one is unobtainium.

Ill get back with a report if the new capacitors did any good.

Cheers, Göran

[astro]

Wow, congratulations! Its so pretty! Do you get good reception even without antenna?

cheers, astro

[Author]

Posts