AdamS
Forum Replies Created
- Posts
-
The Line In/Line out connector is to separate the preamplifier and power amplifier sections of the unit and is not suitable for plugging anything external in. As you have found, if you remove the linking plug, you don’t get any sound from the speakers.
I can’t comment on where the 36mV figure in the service manual came from but it sounds like a misprint! the Tape 2 and AUX connections are normal line level inputs and so this is where you should be connecting your streamer.
Also, I’ve seen some people make the Room Compensation measurements, but never enable the filters in the Preset.
I would never dream of doing something that silly, however, after a software update a few years back (I can’t remember if it was in the BL90s themselves, or the B&O app) the setup reset itself to switch the Room Compensation filter off.
It was a good few days before I realised something didn’t sound quite right and investigated!
That looks superb – excellent job!
Although I hate to break it to you but you’re not really listening to CX100s by the looks of it, as they appear to be far from original.
Hi Steve, A cheap Beogram is always worth it. My best deal was a € 80 Beogram 4000 with a $ 70 SMMC20EN – brand new.
My best was a mint, boxed Beogram 4000 from a car boot sale for…………I hope you’re sitting down……….£4!
I repaired and serviced it and then foolishly sold it for the dizzying sum of £90. About 3 months later, Haden Boardman did an article on them in Hi-Fi World magazine in the UK and values shot up to about £500 overnight.
As we all know, those values never came back down. Selling that deck is the biggest audio regret of my life!
Hi Adam, Good point, I will have another check inside the Beogram to see if there is an MMC4 lurking in there anywhere! Still on the lookout for a good pair of RL140 (and an MMC4!) By the way, will you be heading up to the Maverick hi-fi show again this year? Will be great to hear your B&O setup again! Kind regards, Steve.
No, not planning on doing the show this year – I haven’t joined the forum, either, but I may do at some point.
Hi Adam, That is a real bargain, I also love the sleek lines and sound of these later radial Beograms, so I’m busy finding a reason to justify keep this one! Kind regards, Steve.
I wouldn’t worry, Steve – B&O speaks to the heart so justification is unnecessary! I enjoyed your video and glad to hear the Beogram is up and running. The stylus brush down the back made me chuckle as well – Tim Jarman mentioned to me long ago that he has found dozens of these under Beogram top plates over the years. Then again, the last thing he found inside a Beogram turned out to be a perfectly serviceable MMC4, so do always check inside if you hear rattling!
Adam.
P.S. – have you treated yourself to some RL140s yet?Tim is still alive and well and repairing B&O!
You can contact him here: https://beocentral.com/contact
I’ll watch the video later, but in my opinion, a £45 Beogram 2000 is always worth buying! My Beogram 2000 actually cost me £21 as it didn’t work but it’s in superb condition (and, of course, it works now…).
As an aside, the Beogram 2000 is actually my favourite of the later Beograms. I prefer the radial trackers of this era as I think they sound better than the linear tracking types, and you want all the features such as repeat and Datalink, so that narrows it down to the Beogram 2000 or 5000.
Whilst the 5000 is essential as a part of the 5000 system as it matches correctly, when taken in isolation I think the Beogram 2000 is the nicest looking – sleek plinth styling and a full clear lid. I really don’t need a Beogram 2000 but mine’s not going anywhere!
Hi-Fi Wigwam is in its death throes and now Beoworld may have an uncertain future.
I need a lie down…
Martin’s words are spot on but be VERY careful which switch cleaner you use!
I have used Servisol (Now Kontakt Chemie) Super 10 for 30 years and my father used it for 30 years before me. In all that time, the only thing it has ever damaged for either of us was….A Beovision 3502 switch unit.
Ours started having intermittent contacts and so my father gave it the treatment and it was fine for a week or so. Then, one day, he clicked out the volume/tone control drawer and it wouldn’t go back in. Long story short, it needed a complete new switch unit and the dealer showed us the old one which looked like it had had acid poured over it – the whole back of it had completely melted.
So, for the first and, I hope,only time in my life I will say to you – for god’s sake don’t use Servisol switch cleaner on it!
Yes, I do know Tim very well and I will happily pass on your comments!
Which particular aspect of it are you referring to? Tim doesn’t really update the site with new B&O products as they aren’t of much interest to him – the site is intended as a reference for the classic models.
I do keep nagging him to put more stuff in the ‘Workshop Notebook’ section, though!
Latest B&O toy here, found in a local ‘junk’ shop by a work colleague. Needed a very, very deep clean and some attention to the battery compartment which had suffered from some badly leaking batteries.
After that, a basic service and it works a treat!
Everything’s going up, sadly. Have you seen the price of Beolab 90s recently?!”
