The issue with the Rec Cal data in Beocord 9000

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 28, 2023 at 4:55 am #27808
    beolover.vn
    BRONZE Member
      • Topics Started 2
      • Total Posts 4

      Recently, I acquired a BeoCord 9000, and in terms of technical performance, all functions work well, and playback is excellent.

      However, when it comes to recording, I tried different tapes such as normal, chrome, and metal. The PPM values vary significantly, and I’m not sure if this is normal.

      Regarding Rec cal data, I performed the steps for a TDK SA 90 tape, and the values obtained are as follows: 09.1, 11.2, 00.3, 00.4, 07.5. These are the values after Rec cal. Data for items 3 and 4 are completely missing. I would like to ask if this could be a fault with the Beocord?

      December 28, 2023 at 11:29 am #27818
      Dillen
      Moderator
        • Topics Started 3
        • Total Posts 587

        I have seen cases where Beocord 9000 rec. cal ends as Metal tape detected with a CrO2 tape inserted,
        if the Beocords bottom plate is not fitted, so correct assembly is one important thing.

        Martin

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.