[loureed5]

Hoping someone can help set me straight on the in-built DVD in the Beovision7- 40.

The unit has defaulted somehow to play only Region 2 discs, not Region 4 which is Australia’s

region code.

Is there anything I can do to change it back to Region 4, or multi-zone it, or will it have to go to a service centre ?

regards

Noel

[Guy]

Hi Noel,

I had a quick look at the service manuals (available here) and they state that the ‘Service Tool’ is required to change the region code, so unfortunately you will need to contact a service centre – perhaps ask them to visit you if they have the tool which could be easier than moving the TV.

It is strange that the code has changed, but I think I have read about this problem before on one of the archived forums. The service manuals do also explain how to check (but not change) the current codes.

EDIT: See also this thread about a special remote: https://archivedforum2.beoworld.co.uk/forums/p/38034/289325.aspx#289325

[Keith Saunders]

Whilst the region setting can be change with the service tool, its not a requirement.

Eleven years ago I wrote the attached document and made an XML file for the Beo5/6.

Attached is the Procedure for setting a Beovision 7 & AVANT DVD to Region Free

[loureed5]

Thanks for all the help guys.

Thanks Keith for the procedure sheet- but how do I disconnect the

DVB-T module ?

regards

Noel.

 

[loureed5]

And the sheet refers to a “special” Beo4 Remote ?

[Keith Saunders]

loureed5 wrote:

And the sheet refers to a “special” Beo4 Remote ?

You only have the two options and the procedure provides the instructions for both.

1. Get hold of the “Special Command 2” Beo4
2. If you have a Beo5/6 and you load the XML file which I built 11 years ago and I can supply.

If you do not have one of above, then you will not be able to make it region free.

[loureed5]

Hi Keith,

Many thanks for your reply, and supplying the procedure sheet.

I will have to try and get access to the special remote.

regards

Noel.

[Author]

Posts