Modern speakers for Beocenter 2200?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #16708
    hmm
    BRONZE Member
      • Topics Started 3
      • Total Posts 6

      Hope someone can suggest something…

      I’m about to dig out my old Beocenter 2200 (not used for the past 20+ years).

      I’d like to connect some speakers that are perhaps slimmer or more stylish than the originals (Beovox 25?).

      I don’t know the technical requirements but they don’t need to be more powerful than the originals.

      Any suggestions anyone? Many thanks.

      #16729
      Mark-sf
      BRONZE Member
        • Topics Started 0
        • Total Posts 294

        By slim do you mean less wide or less deep? If you want to preserve it as a B&O system, a pair of CX100’s are narrower and are quite stylish IMHO. Remember, this unit has a built-in loudness contour in the volume control (which you can’t bypass without getting inside) so should not be paired with speakers that are bass heavy.

        #16889
        hmm
        BRONZE Member
          • Topics Started 3
          • Total Posts 6

          Many thanks Mark.

          Just wondering – CX100s are 6 ohm, 2200 is 8 ohm; does this have any effect in practical terms?

           

          #16892
          Mark-sf
          BRONZE Member
            • Topics Started 0
            • Total Posts 294

            No, as the amp is rated at 25W into 4 ohms.

          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.