MLGW and BL3500

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 25, 2022 at 11:41 am #6999
    Chris_101
    BRONZE Member
      • Topics Started 1
      • Total Posts 3

      Hi All

      I’m thinking about buying a Master Link Gateway, but it seems like in order to use it with BeoLab 3500 you need a firmware version 3.3 or higher, my BL3500 are firmware version 2.0 and I can’t find any PCB36 with FW 3.3, also I have 5 of them so it would be expensive.

      Can someone confirm, that it won’t work with the lower FW versions before I buy a MLGW?

      Best regards

      Christian

      July 25, 2022 at 11:59 am #7000
      Guy
      Moderator
        • Warwickshire, UK
        • Topics Started 14
        • Total Posts 1,235

        Did you see this thread which may be helpful depending on your planned usage?

        https://archivedforum.beoworld.co.uk/forums/t/39994.aspx

        July 25, 2022 at 12:12 pm #7001
        Chris_101
        BRONZE Member
          • Topics Started 1
          • Total Posts 3

          No I did not 😉 so thanks for the link. I need to use the home automation and macros, so as I read it the BL3500 needs to be updated.
          Does anybody know if the PCB36 still can be bought?

          July 25, 2022 at 12:17 pm #7002
          Guy
          Moderator
            • Warwickshire, UK
            • Topics Started 14
            • Total Posts 1,235

            The last post in that thread mentions B&O part number 8006039

            Maybe give AVA Services a call and see if it is still available: https://www.avaservices.co.uk/

            July 25, 2022 at 12:22 pm #7003
            Chris_101
            BRONZE Member
              • Topics Started 1
              • Total Posts 3

              Thanks ?

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.