Lubricating Sintered Bearings in Beocord 8000/9000

This topic has 22 replies, 5 voices, and was last updated 1 year, 6 months ago by sonavor.

Viewing 3 posts - 21 through 23 (of 23 total)

Author

Posts
May 9, 2023 at 6:03 pm #20193
sonavor
BRONZE Member
- Topics Started 0
- Total Posts 64
Is that encoder tool something you made or is it something that can be bought? If the latter, can you post a link for it?

Thanks,
sonavor
May 9, 2023 at 9:30 pm #20201
Glitch
BRONZE Member
- Topics Started 15
- Total Posts 302
The encoder is a Calt PD30-8G1000BST5. I believe that you can buy it on Amazon (mine was purchased elsewhere). The brass adapter to mount the encoder wheel on the motor or capstan shaft and the magnetic mounts for the encoder pickup where both custom fabricated.

Glitch
May 10, 2023 at 9:09 pm #20244
sonavor
BRONZE Member
- Topics Started 0
- Total Posts 64
I tried your “easy” motor opening method and it worked great. No more Dremel and debris from the cutting. Best tip I’ve received in a while. Thanks again.

-sonavor
Author

Posts

Viewing 3 posts - 21 through 23 (of 23 total)

You must be logged in to reply to this topic.