[matador]

The 3D models for the project are available to download in the first post. It’s written in bold and can easily be seen (I’ve stopped counting the numerous PM I receive asking for the STL’s).

So, just download them and have them printed by a friend or a printing service.

Just DON’T BUY THEM. Someone as open a B&O shop just near where I leave and is selling the clamps I designed and that are available here for free without any added value.

Good luck for your project.

[BenO Hobbyist]

Matador

Als je zo gedetailleerd en duidelijk uitlegt hoe je met je ontwerp een houten hoes voor de Beolab 8000 zo mooi kunt maken, zoals ik in het artikel las, word ik inderdaad heel enthousiast.

Dus dat is wat ik geworden ben, je steekt er zoveel tijd in om dit mooie resultaat te bereiken!

Ik kan beginnen met het bekleden van de Beolab 8000 met de houten hoes.

Waarvoor mijn oprechte dank,vriendelijke groeten,BenO

Hobbyist
Hans Reurings

[Anxo200]

Muchas gracias Matador por tu trabajo y el diseño GRATIS que pusiste en esta página. No estoy seguro si algún día lo haré, pero se ve espectacular, es una actualización realmente buena. Muchas gracias de nuevo

[Aym]

Hello Matador and everyone

@ Matador: thank you so much for your increible work and most of all, sharing it with us and giving us all the information and guide for installation !!!!! 🙂

I am living also in france and contacted a 3D printer and sent them the 2 stl fils for the clamps. Surprisingly, for one the “top” stl file, the company asks me to check the size as it appears very very smal and the company sent me this message: “Could you confirm me that the size is 13,21 x 3,51 x 2 mm ? ”

I do believe it should be the same figures for cm, so we should print 13,21 x 3,51 x 2 cm.

• Could you please confirm?

(don’t know why they get this size).

• Also, could you confirm the material you choose for the clamps. The 3D company offers different produts: PLA (materiau biodegradable) : Polyester (PET) : ABS (Acrylonitrile Butadiene Styrene) ; or ASA (ACrylonitrile Styrene Acrylate).
  Not knowing, I chose ASA product as it seems to be used for toys, electric setups, car parts..
  Could anyone help me and confirm the choice.

  Again, thanks a lot for Matador and everyone. This will make our beolab so nicer !

  Aymeric

[matador]

Thanks all for the kind words.

About the sizing: long time since I did this but the right size is somewhere around this thread. It’s usual to have to scale the STL mesh from 10x to 100x.

Please read all the thread!

About plastic: I don’t know enough. I think mine were printed in PLA because I’ve heard this term somewhere but I’m not sure, so I can’t really help there.

[matiasjensen]

Hi there,

I have a question, i am using AnkerMake Slicer to import these STL files.

But it seems like the size is too small? and when i try to increse the size it wont work.

Can you help me please? look the picture.

BR

Matias

[matiasjensen]

Hi Matador,

I have a question, i am using AnkerMake Slicer to import these STL files.

But it seems like the size is too small? and when i try to increse the size it wont work.

Can you help me please? look the picture.

BR

Matias

[Rajkumar-Cat]

Hi Matiasjensen

There was reply date: January 6, 2023 at 11:15 am QUOTE #13715 member uploaded STL 3d file which one perfect, Just I had printed clamp and fit perfectly. He designed 3 clamps Top, Middle and Bottom. I searching wooden strips than I will post my work. Raj

[jaspers1996]

Thanks for sharing matador! Very happy with the result.

[silou]

Hi Matador,

Bravo, joli travail !

What would a wooden BL 3500 look like. Handsome or ugly ???

[alexsalles]

I did mine, got the wood the way I wanted but the clamps I got 3D printed locally and I wasn’t aware 3D printer can vary printing quality so much. Mine did not clipped well and most didn’t clip on the clamp at all, I had to glue the slats. I was checking etsy and saw this guys that sells the clamps. so if anyone is not finding a way to get them on the link I shared.

********************************************************
LINK REMOVED – THIS IS PLAIN PIRACY: THAT GUY SELLS
MODELS THAT ARE AVAILABLE HERE FOR FREE
PRETENDING IT IS HIS DESIGN AND ALSO GIVE THE IKEA LIKE
USER GUIDE YOU CAN FIND ON PAGE 1 OF THIS TOPIC.

DON’T BUY THIS CLAMPS AND DON’T PROMOTE PEOPLE
WHO ARE SELLING THEM, PLEASE !
********************************************************

Thanks to member sydk for bringing this to my attention.

 

[Alfredo02]

Dear Matador

Starting the new 2024, I just joined this forum and found your nice piece of work to provide the 8000s with such a fine wood fret cover. I was looking for a solution to upgrade my 8000s and I can not be more grateful to your work and your nice offering to the forum members.

I just downloaded the files, will start immediately looking for a printer shop in Spain and shall arrange to buy the frets.

Again, Matador, thank you for your great contribution to the community.

All the best and happy new year!

Alfredo.

[wol0977]

Hi Guys!

Any chance to get a stl file of the clamps for the beolab 6000?

thx

[martiis]

hey, maybe some one can help with 6000 file cant find :((((

[Christianio]

Hej Mr.

Where can i buy this piece.. I cant find it Anywhere??

 

 

[wol0977]

have a look on etsy. i bought mine there. i don’t have a 3D-printer, so the only possibility to get some. price is ok.

[wol0977]

still looking for clamps for beolab 6000. can anybody help?

thx

[swo]

Could you please so kind and provide a Link? or your search words

 

Thanks

[wol0977]

https://www.etsy.com/at/listing/1628134005/beolab-8000-klemmen?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_at_de_at_ssc-other&utm_custom1=_k_Cj0KCQiAoKeuBhCoARIsAB4Wxtea3LEF3SPMiZgNiXfYbMldzrqrrmP9rIBlWpF8wKTRfrZoVmUzALgaAt15EALw_wcB_k_&utm_content=go_20190656386____m__1628134005deat_422713907&utm_custom2=20190656386&gad_source=1&gclid=Cj0KCQiAoKeuBhCoARIsAB4Wxtea3LEF3SPMiZgNiXfYbMldzrqrrmP9rIBlWpF8wKTRfrZoVmUzALgaAt15EALw_wcB

[BramBoerema]

Hello,

I was wondering if someone already has the 3D files for the 6000 serie. And ifnot is the outline of the 6000 the same as the 6002? Because i can design the clamps for the 6002 but im not sure if they will fit on the 6000.

[Author]

Posts