Connect Beomaster 7000 to SONOS

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #8547
    gerry@whatbigbrandsknow.com
    BRONZE Member
      • Topics Started 1
      • Total Posts 3

       

      I have a Beomaster 7000 with a phono, CD and tape. I purchased a 7 pin DIN with two RCA jacks to connect to my SONOS connect.

      I want to play the system to the line in on the SONOS. It will not play from any of the 7 pin connections. I got it to play from the headphone jack so I know the SONOS line in is working.

       

      There was another post that said to use the tape connection I tried both tape 1 and 2 with no success.

      The line in/out jack doesn’t work either. Possibly because I have only line out, not back in. It appears it may need both to make the loop?

      Any help would be appreciated.

       

      image

       

      #8555
      trackbeo
      BRONZE Member
        • Topics Started 6
        • Total Posts 245

        The Line In/Out jack is used for an equalizer (or similar) between the 7000’s preamp section and its amplifier section. Your photo shows the factory-installed crossover plug, which you should leave alone. (If it were removed you would get no sound out your non-powered speakers.)

        In your case, I would use the Tape 2 jack, just because it’s easier to put your fingers on. The usual problem is that someone gives you a Line-In RCA->DIN-8 cable rather than the Line-Out cable — just the wrong pins hooked up. For this reason I tell folks to buy a Tape-In-AND-Out cable even if you don’t need it — so you can listen to test which plugs are the inputs and use the *other* two! I bought one on amazon, ASIN# B00M0FXR8A, less than $10. Also a forum sponsor (scroll down) sells cables, and guarantees you’ll get the correct one if you order just Tape->Line-Out!

        #8589
        gerry@whatbigbrandsknow.com
        BRONZE Member
          • Topics Started 1
          • Total Posts 3

          Awesome. SO helpful. Thank you!

          I did try the line in/out and it unfolded exactly as you said.

          I’m sure I did buy the wrong cable.

          This is the one I bought:

          CablesOnline 6ft 7-Pin Din Male to 2-RCA Male Professional Premium Audio Cable, Black for Bang & Olufsen, Naim, Quad.Stereo Systems (BO-2706K) https://a.co/d/ctESyOs

          thanks!!

          #8591
          Steve at Sounds Heavenly
          Moderator
            • Topics Started 50
            • Total Posts 364

            Hi,

            This is the cable you need, it connects to either the Tape 1 or Tape 2 socket of the Beomaster to give you 2-way music between the B&O and the Sonos systems (please note that this link won’t work until Monday morning, as my site is closed for maintenance today):-

            https://soundsheavenly.com/bang-olufsen/154-2336-5-pin-din-to-4-x-rca-input-and-output-cable-for-bo-naim-quad.html#/2-length-1m

            Please ask if you need any further help!

            Kind regards, Steve.

            #8594
            gerry@whatbigbrandsknow.com
            BRONZE Member
              • Topics Started 1
              • Total Posts 3

              Thank you!

              You guys are amazing.

              I was just scrolling through your site to find the right cable and was going to send you a message.

              You made it easy for me!

              I’ll order this week.

              Thanks!!

              Gerry

              #8596
              Steve at Sounds Heavenly
              Moderator
                • Topics Started 50
                • Total Posts 364

                Thanks Gerry,

                Please ask at any time if you have any questions.

                Kind regards, Steve.

              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.