[silou]

Hi,

The goal is to use the BL3500 as a standalone. The non-Beo audio goes into the 1611.

Just connected a BL3500 with a 1611 with a ML cable.

BL3500 can start with any source key. But stay no on and canot adjust the volume.

Is something wrong or is this idea no possible ?

Thanks

[Guy]

That sounds like the BL3500 is not getting a ‘valid’ input.

Try pressing MENU 09 GO and checking that ML is switched on, as described in this post by madskp: https://beoworld.dev.idslogic.net/forums/topic/beolab-3500-does-not-work-in-masterlink/#post-22054

PS: I think I recognise your username from the archived forum, but if you are indeed new here then welcome to Beowrold!!

[silou]

Thanks Guy,

With a new cable it works ! But the sound is coming only when an Video source is selected.

No sound with radio or AAUX or ATAPE2 or …

 

PS Yes I was on the old forum. I’m back!!! Thanks

[Guy]

Welcome back!

Yes that’s how it will perform with a standard DIN input (pins 3 and 5) to the BL1611’s AAL socket – only VIDEO source selection will activate the input.

Have a look at this post (and thread) and you will see that the BL1611 can accept an AUDIO input but only if connected to pins 1 and 4 of the DIN AAL input: https://beoworld.dev.idslogic.net/forums/topic/beolab-3500-and-1611-converter-settings/page/4/#post-14017

It’s a very useful solution for a double input to BL3500 etc.

[silou]

Very interesting post!

Perfect thanks Guy !

 

[Author]

Posts