[libor]

Hi Beofans,

would somebody with BL3’s on table stands be so kind and tell me the total height? I have quite a limited space under cabinet and would like to be sure that my BL3’s will fit after I buy table stands, thanks.

Oh and how thick is the base plate? Is it more then 6 mm?

[Tignum]

Hi libor, welcome!

I do not have these speakers but found a pdf catalogue that says they are 32cm high:

I trust they will need a bit of space around them to work correctly, that will for sure be written in the manual.

At the B&O website you can download an ‘.obj’ file of the BeoLab 3 that might give you the exact height of the base (using a CAD system).

Good luck, would be nice to see a photograph of the result in the ‘Flash your B&O’ thread!

Regards,

Johan

[Tignum]

The .obj file shows like this in my standard mac preview app (I cannot measure it there, sorry).

[Rolf2]

Hi libor,

I can confirm a total height of 32 cm as Johan has displayed. I have the BL 3 on table stands in our bookshelf. In my case, I was able to build the bookshelf around the speakers :-).

The round base plate is 6 mm thick and it stands on rubber feet which take appr. 0,5 – 1 mm in height (I cannot measure more accurate, sorry).

I hope it helps.

Kind regards,

Rolf

[Millemissen]

Hi libor.

If you have limited space/height there, why not go for the rubber stands instead?

Would also make it easier to point the speakers a bit up or down depending on what you’d need.

Please do not move these speakers too far back from the edge of the shelf/cabinet – the Acoustic Lenses need space for spreading the sound.

MM

[Author]

Posts