Beosound 1 (BT/WiFi): No more local control.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #20102
    T.W.G
    GOLD Member
      • Topics Started 7
      • Total Posts 33

      My Beosound 1 (Bluetooth/Wifi) doesn’t react anymore to local control. I can tap on the top or turn the wheel: Doesn’t work. The LEDs are off, too.

      I’ve reset it multiple times, no success.
      BUT: It starts via Bluetooth remote or Wifi control (app and remote) and is controllable.

      Some data:
      – Beosound 1
      – Item No. 1665511
      – Software: 2.1.50868.22855122
      – Status -> Critical events: Battery level is critical, SHUT DOWN! (This message is shown multiple times in the protocol)

      I think I’m somehow out of luck with some B&O products despite my love of it. ๐Ÿ™‚

      #20104
      Die_Bogener
      BRONZE Member
        • Topics Started 2
        • Total Posts 240

        … and why dont’t you replace the battery? Or is the AC charging tool defect?

         

        It’s a lithium battery. That’s no fun… it can burn or explode…

        #20160
        T.W.G
        GOLD Member
          • Topics Started 7
          • Total Posts 33

          Is there a service manual on how to dismantle it WITHOUT scratching and damaging? ๐Ÿ™‚ Didn’t find one on Beoworld nor online, only for the lovely old Beosound 1 with CD player.

          Can anybody tell me if my BS 1 item no. 1665511 is MK1 or MK2? There are two different batteries available.

          Currently I didn’t disassemble the BS 1 so I can’t tell whether the internal charging circuit is dead or just the battery.

          It’s strange that local control is broken… and even stranger if this has its cause in a broken battery.

          Yes, I know that lithium batterys aren’t fun. That’s why I don’t buy an electrical car, too. ๐Ÿ˜‰

          #20161
          trackbeo
          BRONZE Member
            • Topics Started 6
            • Total Posts 245

            Probably a Mk.1. My Mk.2 says item no. 1665522. But it’s also easy to tell without guessing at decoding numbers: If your Beosound 1 were a Mk.2 the label on the bottom (line 2) would say, “Model: BeoSound 1 2nd generation”.

            #20164
            T.W.G
            GOLD Member
              • Topics Started 7
              • Total Posts 33

              Model: BeoSound 1 2nd generationโ€.

              Okay, that was too obvious. ๐Ÿ˜€ Thanks.

              So, MK1 battery required and service manual.

              #20238
              trackbeo
              BRONZE Member
                • Topics Started 6
                • Total Posts 245

                I’ll do a Gold Membership again if you actually get a service manual, and give it to Lee or Keith to scan! In the meantime, here’s a take-apart video: https://www.youtube.com/watch?v=6sF3mNfomxI (The Vietnamese subtitles and auto-translation are weak. Notice that he had already removed the antenna connectors and also taped up the metal surround for prying. It’s a 2nd-gen.) Last week on the BeoTalk stream, @Mikipedia mentioned the 3 bottom plastic covers break easily and @Beowillie confirmed, saying he kept spares in his parts stash.

              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.