Beolab Penta MK1

Viewing 4 posts - 21 through 24 (of 24 total)
  • Author
    Posts
  • #22448
    Glitch
    BRONZE Member
      • Topics Started 15
      • Total Posts 302

      I used iCraft Supertape based on several recommendations in another forum. It has been seven years since I changed the grill cloth and it is still holding strong.

      Glitch

       

      #22492
      NickNS
      BRONZE Member
        • Topics Started 1
        • Total Posts 10

        @Glitch can you perhaps take a photo of your grills from the inside. I don’t know what to do with the tape and the cloth around the clips on the frame. If I cut around them, the cloth pulls comes out because of the tension. If I snuck them in the clip, then it can’t move properly to be attached to the speaker. These are the grills from hell :)))

        #22497
        Glitch
        BRONZE Member
          • Topics Started 15
          • Total Posts 302

          Penta_Grill

          It has been long enough where I’ve forgotten most of the finer details of recovering these grills. Hopefully you can see what you need from the picture.

          Taking the grill off reminded me of how precarious the procedure feels. No matter how many times I’ve done it, it always seems like something is about to break. 😉

          Glitch

           

          #22500
          NickNS
          BRONZE Member
            • Topics Started 1
            • Total Posts 10

            Thank you!

            So you tucked them in, but just a little bit 🙂

            I’ll try.

            Nick

          Viewing 4 posts - 21 through 24 (of 24 total)
          • You must be logged in to reply to this topic.