Beolab 90 design secrets uncovered…

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 9, 2022 at 1:42 pm #12391
    Steve at Sounds Heavenly
    Moderator
      • Topics Started 50
      • Total Posts 364

      Hi Beoworlders,

      Want to know how the World’s most advanced loudspeaker was designed? It is time to find out… This video uncovers the design process of the amazing Beolab 90 from B&O!

      Kind regards, Steve.

      December 10, 2022 at 10:56 am #12404
      Tignum
      GOLD Member
        • Netherlands
        • Topics Started 8
        • Total Posts 361

        Thanks for this Steve, I find it really interesting to see why some design choices were made. Still curious how the one piece bezel is actually produced before it gets bent and polished!

        December 10, 2022 at 11:31 am #12405
        NQVHNWI
        BRONZE Member
          • Topics Started 7
          • Total Posts 506

          This is an old YT video on Noto and BL90 Design. The fabrication of the crown and its economics is described briefly here at 18minutes.

           

          December 10, 2022 at 1:08 pm #12407
          Tignum
          GOLD Member
            • Netherlands
            • Topics Started 8
            • Total Posts 361

            Gotcha! A loop milled from a strip. Smart “software guy”! (19:12).

            Good persistence to hold on to a design philosophy so much that a weld (that normally is hidden on the back) gets eliminated because the speaker is 360°, and hence has no back!

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.