[BEOGRAM5500]

Hello, i have cd5500 that now have stopped playing cd,s. spinning and laser is seaching and then stops. Weak light from laser. any ide,s. Recap all cap,s is one ide i have read about on net some time ago.

Magnar.Norway.

[Soren]

You would have to replace the blue Phillips capacitor C2108 and then your 5500 are playing again, that is a common problem on most CD players.

you can buy the kit here:

Capacitor kit for CDm Disc Drive Servo Beogram CD Beocenter

[filip_kbh]

It’s C2103. Indeed it’s the blue one to the left of the microprocessor on the above board. A very simple capacitor to change, as long as you get the right one 🙂

[Motorman]

Its a axial 33µF 16V Capacitor. I just exchaned it on a Beogram CD7000:

Old:

New:

I used a radial 33µF 25V one. It worked like a dream.

[kronzilla]

Could be that the laser reach the end. Or laser current must be corrected ( don’t do if you are not familiar, you would kill the laser from overcurrent)

[BEOGRAM5500]

Changed all elktrolytte capasitors. Got a kit from Beoparts. Problem solved. AS NEW.

[chartz]

Excellent, and well done. ☺️?

[BellerophonBKK]

Any further details you can supply of the ‘simple’ change would be most appreciated for the non-electronic electorate amongst us, video, images would be fantastic

 

Thanks

[kronzilla]

Motorman wrote:

Its a axial 33µF 16V Capacitor. I just exchaned it on a Beogram CD7000: Old: New: I used a radial 33µF 25V one. It worked like a dream.

indeed. i read somewhere that you need to take a normal high esr elco, a low esr elco does not work there …

[Author]

Posts