Beogram CD 5500 right channel no sound

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 10, 2023 at 2:19 pm #21205
    69er
    BRONZE Member
      • Topics Started 16
      • Total Posts 47

      Hi B&O Fans,

      a new small project on my table.

      A Beogram CD 5500. After replacing the famous capacitor the CD runs now.

      But unfortunately only on the left channel.

      Cause i don´t have an oscilloscope – is there anything else, i should take a deeper look at?

      I checked the solderings, but nothing obvious.

       

      Best regards

      69er

      June 10, 2023 at 2:42 pm #21206
      quattttro
      BRONZE Member
        • Topics Started 6
        • Total Posts 47

        I would check the relay first. Perhaps the right channel isn’t making adequate contact.

        June 10, 2023 at 5:10 pm #21218
        69er
        BRONZE Member
          • Topics Started 16
          • Total Posts 47

          Hi quatttro,

          where is the relay in a Beogram cd?

          best regards

          69er

          June 10, 2023 at 5:50 pm #21221
          Dillen
          Moderator
            • Topics Started 3
            • Total Posts 587

            Check the filter capacitors and their respective resistors for the opamps in the analogue output stages.

            Martin

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.