Beogram 5500 turn table
- This topic has 1 reply, 2 voices, and was last updated 2 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
- Posts
-
Platter is not level. I believe one of the transportation screws is stripped. How should I proceed?
The transport screws are not used to adjust the leveling and do not come out so they are not likely stripped. The screws to level are under the platter. Take a look at the service manual at https://beomanuals.com/manuals/Beogram/Beogram%205500/Beogram_5500-Service_Manual-version2.pdf for instructions.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.