Beogram 5500 DIN connector

Tagged: 

  • This topic has 3 replies, 3 voices, and was last updated 2 years ago by Ismo.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 4, 2022 at 9:43 pm #10732
    Ismo
    BRONZE Member
      • Topics Started 3
      • Total Posts 12

      Hi,

      Can anyone tell why there is 2 different din connectors for Beogram 5500 ? 5pin connector and 7pin connector. Below is the 7pin connector that has 2 bottom (thicker) pins as extra.

      Regards,

      Ismodin

      November 4, 2022 at 11:15 pm #10736
      Mark-sf
      BRONZE Member
        • Topics Started 0
        • Total Posts 294

        The extra pins in the 7-pin one carry the Datalink signal to Beomaster receivers for remote control. The pins can be unscrewed to use with a DIN-RCA adaptor.

        November 5, 2022 at 11:44 am #10751
        Guy
        Moderator
          • Warwickshire, UK
          • Topics Started 14
          • Total Posts 1,235

          But if you do remove the two extra pins keep them somewhere safe so that future users of the Beogram can use datalink again! ?

          November 5, 2022 at 4:54 pm #10761
          Ismo
          BRONZE Member
            • Topics Started 3
            • Total Posts 12

            Thanks for fast answers.

            Ismo

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.