[Sweetfrost]

Hi there.

 

I got this fine Beogram 2200 recordplayer. But the Din connector is bad – previous owner did a bad job soldering and i want to re-solder the wires.

But what wire goes to what pin? And how do i identify the right wire for the pin – and lastly – what about the shielding ?

 

I hope you can help – it would be much appreciated.

regards from Denmark

 

[Mark-sf]

Take a look at the 2200 schematic at https://beomanuals.com/manuals/Beogram/Beogram%202200/Bang-Olufsen-Beogram_2200-Schematic.pdf. It provides all that detail.

[yachadm]

Check this photo.

Looking inside the 5-pin DIN Male plug.

Center pin – Signal Ground

Pin at 2 o’clock – Signal Right

Pin at 4 o’clock – Signal Left

Menahem Yachad

Jerusalem

[Author]

Posts