[guigui37]

Hello,

I have a Beogram 1203… at starting (pressing the button) the relay makes an ugly noise… if i press a long time the button then the engine finally will start.

The orange part in the middle of this picture :

https://www.audiovintage.fr/leforum/viewtopic.php?t=4933&start=20

Do you think it’s a problem with the realy OR with the capacitor or other small electronic stuff that are soldered on the relay ?

Thanks for your help.

 

Je peux aussi écrire Francais 🙂 … c’est juste pour être plus éligible à plus de réponse mon anglais à la de Funès.

Bises à tous les fans BEO :o)

[guigui37]

Does anyone know the value and the type of the capacitor inside the relay housing on a 1203 (or 3000 or 1202 or 1201 or 1200 or 2000 type 5240) ?

 

Quelqu’un connaitrait il la valeur et le type du condensateur se trouvant dans le boitier du relais d’une 1203 (ou 3000 ou 1202 ou 1201 ou 1200 ou 2000 type 5240) ?

 

Merci 🙂

[Denisc]

Hi, send a mail at the Beoworld member Dillen , i think , he can answer you.

[guigui37]

Thanks you so much 🙂

[jerome_nk]

Hi !

Did you get an answer ?

I’m facing the same issue on my 1203. 🙂

[Dillen]

If the relay is chattering, it could be the diode inside the housing has shorted.
I have seen this happen a couple of times.

All fine inside the relay housing? – Check the adjustment and position of arms and levers
and that the small wire spring on one of the relay box arms is still present.

Martin

[Author]

Posts