Beocord 1900 Pause issue

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 6, 2022 at 10:03 pm #10824
    Pindsen
    BRONZE Member
      • Denmark
      • Topics Started 16
      • Total Posts 57

      Hi,

      I have a Beocord 1900 on the workbench and it seems to play fine, it can FF and REW but when it is in playback mode and pause button is pressed it activates 12RL1 that activates the autostop function and that should not happen to my knowledge.
      Do any of you know what is causing it?

      /Pindsen

      November 6, 2022 at 10:12 pm #10825
      Dillen
      Moderator
        • Topics Started 3
        • Total Posts 587

        Could be one or more of:

        Leads broken off the switch at the tapehead bridge.
        Bent switch leafs.
        Oxidated switch contacts.

        Martin

        November 8, 2022 at 8:52 pm #10991
        Pindsen
        BRONZE Member
          • Denmark
          • Topics Started 16
          • Total Posts 57

          Both the playback switch and the pause switch are okay (open-circuit when not engaged and short-circuit when engaged).
          The playback switch are not activated during playback, it is open-circuit. The pause switch is opposite.

          November 11, 2022 at 10:31 pm #11082
          Pindsen
          BRONZE Member
            • Denmark
            • Topics Started 16
            • Total Posts 57

            Hi,
            The switches was fine but the orange wire to the Pause switch had fallen of (was not easy to see from above). Now it works 🙂
            Thanx Martin for leading my attention to the switches.

            /Pindsen

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.