Beocenter 7700 back panel stuck

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 24, 2023 at 5:36 pm #23311
    Beomaster 7700
    BRONZE Member
      • Topics Started 2
      • Total Posts 2

      Hi everyone. The back panel of my Beocenter 7700 is not rotating up. I need to replace the belts on the cassette deck and cannot access the screws that allow the unit to be opened up. Do not want to force it. It seems to be locked. Any advice appreciated.

      Thanks

      August 25, 2023 at 4:05 am #23327
      Mark-sf
      BRONZE Member
        • Topics Started 0
        • Total Posts 294

        By back panel are you referring to the black grill that covers the connections? If you are it is only held by gravity. There is a stop piece attached to the underside in the middle of the grill piece that might have gotten stuck down.

        August 25, 2023 at 1:47 pm #23355
        Dillen
        Moderator
          • Topics Started 3
          • Total Posts 587
          Mark-sf wrote:

          By back panel are you referring to the black grill that covers the connections? If you are it is only held by gravity. There is a stop piece attached to the underside in the middle of the grill piece that might have gotten stuck down.

          The black grill (with sockets etc.) is held down by a plate-type bronze spring.
          Just pull up. It’ll snap free.

          Martin

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.