3400 speed adjustment

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 14, 2022 at 9:33 pm #9720
    Tonymaine
    BRONZE Member
      • Topics Started 1
      • Total Posts 3

      Newby to beograms but experienced lightly in other decks. Got a 3400 5726. Replaced belt still running at 32.9 RPM. Where is the fine adjustment located?

      October 15, 2022 at 5:50 am #9734
      Mark-sf
      BRONZE Member
        • Topics Started 0
        • Total Posts 294

        There are small knurled knobs under the black trim aligned with the speed indicators.

        October 15, 2022 at 7:23 am #9738
        Dillen
        Moderator
          • Topics Started 3
          • Total Posts 587

          A red fingerwheel sticks out at the rear of the operating panel – towards the platter, for fine adjustments.
          A lit digit is on the panel right above it, indicating its setting. See the user manual.

          Base adjustments can be accessed through holes the Beograms bottom plate.

          Martin

          October 15, 2022 at 2:07 pm #9760
          Tonymaine
          BRONZE Member
            • Topics Started 1
            • Total Posts 3

            Duh. Thanks. All good now.

            October 15, 2022 at 2:11 pm #9761
            Tonymaine
            BRONZE Member
              • Topics Started 1
              • Total Posts 3

              Sorry. Forgot. I can only find service manual online. Is there a use manual

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.