Posted on

BeoGram 1200

BeoGram 1200

BeoGram 1200

Beogram 1200 – Types 5213, 5214, 5216, 5217 – was Bang & Olufsen’s first ‘designer’ system. The design ‘kinship’ which emphasised the interdependence between B&O’s various products, became a characteristic of B&O for many years. Beosystem 1200 was one of the first products selected by the Museum of Modern Art for the museum’s permanent collection (not exhibition) in 1972. The system components were designed by Jacob Jensen.

In 1969 the Danish Society of Industrial Design awarded Bang & Olufsen and Jacob Jensen the ID prize for the Beomaster 1200 radio/amplifier, Beogram 1200 turntable and Beocord 1200 cassette recorder for unusually beautiful and user friendly design. The jury emphasised in particular the Beomaster 1200 receiver which pointed in a new direction for the design of radios.

In 1972 the Museum of Modern Art in New York (MoMA) chose seven Bang & Olufsen products designed by Jacob Jensen to be included in their Design Collection as representing excellent examples of the Museum’s criteria for quality and historical importance; design, in fact, which had influenced the twentieth century. Beogram 1200 was one of those seven products.

The 1200 series represented the logical continuation of the line of development and design which put B&O at the forefront of manufacturers of entertainment electronics.

From an audio point of view, this was an advance in some ways – isolation from vibration was slightly better though still not up to the later decks. The peg support for the records was however not so clever as the excellent mat of the 1000 and 1800 offered far better cushioning. It did however look wonderful. Close inspection of the studs reveal that the inner studs are slightly shorter than the outer ones. They do remove for cleaning so do make sure you put them in the right places!!

Mounting Options

Bang & Olufsen’s preferred supplier for brackets and stands, STBbrackets, have made a wall mount solution as a general option for Bang & Olufsen Turntables. Distributed throughout the World by the Bang & Olufsen store network, the STB option adds to the diversity of mounting options and positions available.

»Wall Mounting Bracket

Wall Bracket / Shelf for BeoGram

A universal shelf that will support all Bang & Olufsen turntables from the past 30 years. Including three cable entry points to allow you to bring cables from below the shelf or through the wall.

BeoGram 1200 Product Specifications

Type: 5214 ( 1969 – Dec 1973)

Designer: Jacob Jensen

Manufactured: 1969 – 1973

Colours: Rosewood, Teak, White

Speeds: 45 and 33 rpm
Rumble Better than 55 dB (DIN B)
Wow and flutter +/- 0.15 % peak value (DIN)

Amplifier / Output voltage:
250 mV at 1000 Hz, 4 mV input voltage

Pickup arm: Special type
Pickup: SP 14 A
Stylus pressure 2g
Dimensions W x H x D 44 x 11.65 x 33cm
Weight 6.55 kg
Voltage:
110 – 220 V AC
Power consumption Max. 14 W

Output:
5 mV – 1000 Hz / 47 kohms

Upgrade your membership to view documents​

    Type

Language

    Type

User Guide

English

BeoGram 1200 User Guide

Service Manual

Multi

BeoGram 1200 Service Manual

BeoLit 609 FM Export II

BeoLit 609 FM Export II Type Numbers Please let us know​ Designer Please let us…

BeoVox 1001

BeoVox 1001 The Beovox 1001 was a very similar loudspeaker to the Beovox 1200 (Beosystem 1200 version),…

BeoSound Level

BeoSound Level The Beosound Level wifi home speaker is our promise of designing future-proof products…

BeoGram 1202

BeoGram 1202 The Beogram 1202, although looking very similar to the earlier Beogram 1200, was…

Posted on

BeoGram 1102

BeoGram 1102

BeoGram 1102

Beogram 1102 was a fully automatic, hi-fi stereo record player with electronic servo-drive and high specification level. Operation was easy and straightforward. All functions were controlled by pressing the rectangular operating panel and if dissatisfied with the pitch of the record, speed could be adjusted by depressing the panel and rotating the little thumbwheel.

The pickup was an MMC 3000 with a spherical diamond. It tracked records at a stylus pressure of 1,2 grams. In order to fully exploit the pickup’s outstanding qualities, B&O constructed an extremely light magnesium pickup arm which, together with its unique suspension, ensured low inertia and thereby good conditions for correct contact between stylus and both walls of the record groove – at all times. Even warped records could be played satisfactorily.

Despite high specification levels, Beogram 1102 and 1902 automatic record-players are extremely easy to operate. All the technicalities are hidden under the surface.

Bang & Olufsen’s Electronic Servo Drive ensures that the rotatory speed of the Beogram 1102 and 1902 was always correct despite variations in the mains current supply. This is so because the system has a special feedback circuit which effects automatic corrections to compensate for these inherent variations

Beogram 1102 could be made up as part of the Beosystem 1100, together with other compatible Bang & Olufsen products

Beogram 1102 UK price in 1978: £97.00

These decks are beautifully made and offer super sound quality for almost no money. Much easier to maintain than the tangential decks simply because they are very simple! Excellent isolation from external vibrations – strongly recommended – and they were when new by Hi-Fi Choice! Simpler than the earlier 1100 – and better for that! A DC motor replaced the AC motor fitted to the 1100 and was electronically regulated with speed adjustment done through a potentiometer as opposed to the complicated measures used in earlier decks. This method would roll out across the range of Beograms.

Mounting Options

Bang & Olufsen’s preferred supplier for brackets and stands, STBbrackets, have made a wall mount solution as a general option for Bang & Olufsen Turntables. Distributed throughout the World by the Bang & Olufsen store network, the STB option adds to the diversity of mounting options and positions available.

»Wall Mounting Bracket

Wall Bracket / Shelf for BeoGram

A universal shelf that will support all Bang & Olufsen turntables from the past 30 years. Including three cable entry points to allow you to bring cables from below the shelf or through the wall.

BeoGram 1102 Product Specifications

Type: 5715 (1977 – Jan 1979)
Type: 5717 (1977 – Sept 1978)

Designer: Jacob Jensen

Manufactured: 1974 – 1979

Colours: Rosewood, Teak,White

Wall bracket motorized: With movement from wall.
60 degrees for 55” and 19 degrees for 75” and 85”
Wall bracket fixed against the wall
Table stand for 55” only: Lifts TV to upright position
Floor stand: Motorized movement of screen up to 90 degrees from wall in both directions

Upgrade your membership to view documents​

    Type

Language

    Type

User Guide

EN

BeoGram 1102 User Guide

Service Manual

EN

BeoGram 1102 Service Manual

BeoLab 5000

BeoLab 5000 Design is a language which is understood by everyone…” as designer Jacob Jensen…

BeoSound Explore

BeoSound Explore Extremely tough. Ready for anything. Beosound Explore is a rugged outdoor Bluetooth speaker…

BeoSound A5

BeoSound A5 Powerful portable speaker Huge sound anywhere – in the home or outdoors. Beosound…

Beosound Theatre

Beosound Theatre Eyes front. Ears everywhere. Beosound Theatre doesn’t just lead from the front. Twelve…

Posted on

BeoGram 1100

BeoGram 1100

BeoGram 1100

The most basic of a new range of beograms, this model was amongst the first to use the new MMC range of cartridges.

In the case it used the bottom of the range MMC3000 and was designed to be partnered by systems such as the Beomaster 1100.

Much more slim and elegant than the 2000 that it replaced, it featured the triple leaf spring suspension that was a feature of all Beograms from that point onwards. As one of the earlier models in this range, the 1100 used a belt and idler wheel drive mechanism. This would be replaced in the later 02 models with a simple belt drive.

These decks are beautifully made and offer super sound quality for almost no money. Much easier to maintain than the tangential decks simply because they are very simple! Excellent isolation from external vibrations – strongly recommended – and they were when new by Hi-Fi Choice!

Mounting Options

Bang & Olufsen’s preferred supplier for brackets and stands, STBbrackets, have made a wall mount solution as a general option for Bang & Olufsen Turntables. Distributed throughout the World by the Bang & Olufsen store network, the STB option adds to the diversity of mounting options and positions available.

»Wall Mounting Bracket

Wall Bracket / Shelf for BeoGram

A universal shelf that will support all Bang & Olufsen turntables from the past 30 years. Including three cable entry points to allow you to bring cables from below the shelf or through the wall.

BeoGram 1100 Product Specifications

Type: 5705 (1976 – July 1977)

Designer: Jacob Jensen

Manufactured: 1976 – 1977

Colours: Rosewood, Teak,White

Sound system Stereo, matrix
Output DIN 2 x 0.6 mV
Speeds 33 – 45 rpm

Tonearm: radial
Stylus pressure range 0 – 2.5 g
Pickup MMC 3000, Stylus spherical diamond
Radius of curvature 15 µm
Recommended stylus pressure 1.2 g
Automatic pickup movement Yes
Automatic speed selection Yes

Wow and flutter, DIN: < +/- 0.1 %
Rumble DIN unweighted > 40 dB
Rumble DIN weighted > 60 dB
Speed deviation < 0.1 %
Speed control range > 3 %
Dial for speed Stroboscope 120mm

Tracking error
0.126° / cm
Lift system Mechanical
Antiskating: inclined channelling inside bearing

Upgrade your membership to view documents​

    Type

Language

    Type

Service Manual

Multi

BeoGram 1100 Service Manaul

BeoLit 400

BeoLit 400 A new range of transportable radios – the Beolit – was launched in…

BeoVox 1

BeoVox 1 BeoVox 1 provides an elegant and discrete in-wall or in-ceiling two-way passive loudspeaker…

BeoTime

BeoTime In the dark days of a recession, which threatens the type of luxury brand…

BeoCord 1100 (1975)

BeoCord 1100 (1975) The fact that the Beocord 1100 was equipped with Dolby B Noise Reduction system…

Posted on

BeoGram 1000

BeoGram 1000

BeoGram 1000

superbly designed, tastefully styled

The turntable and overall design was by Jacob Jensen; the tonearm and MMC cartridge principle was by Erik Rørbæk Madsen. Beogram 1000 was the recommended turntable for Beomaster 1000.

The First Beogram?

Beogram 1000 was the very first Bang & Olufsen turntable to be designated with the suffix ‘Beogram’. Before its introduction, earlier decks did not, strictly speaking, hold this product name.

This player has extremely low vibration and rumble – a decisive feature for playback of stereo gramophone records, due to the fact that the stylus must be sensitive to vibrations in all directions.

The Beogram 1000 has antimicrophonic suspension that takes up acoustic and mechanical vibrations from the support and prevents the stylus from leaving the groove. In practice, this means that mechanical vibrations from the support or from persons walking or dancing in front of the Beogram 1000 cannot make the stylus jump in the groove. Such vibrations will be absorbed in the antimicrophonic suspension and will not reach the turntable or the pickup.

Equipped with the world-famous B&O ST/L-15 pickup unit; heavy turntable designed as a stroboscope disc; built-in hydraulically damped pickup lift operating y means of a rocker button. Specially engineered speed selector (78, 45 and 33.3 rpm); built-in special centre insert for 45 rpm records. The Beogram 1000 is available in two versions: Beogram 1000V (for 240/110 volts AC) and Beogram 1000VF (for 240/110 volts AC with built-in preamplifier.

Choice of teak or Brazilian rosewood finish and with a practical transparent acrylic dust cover.

And so ends the brochure speak! The Beogram 1000 was heavily based on earlier decks and, despite what B&O said, was not that resistant to external forces. It also was not able to be played with the lid on and indeed the lid had a cut out at the back to allow the pick arm to protrude. It allowed reasonable play back and was reliable but performance led to B&O looking elsewhere for a turntable for the Beolab 5000 system.

Mounting Options

Bang & Olufsen’s preferred supplier for brackets and stands, STBbrackets, have made a wall mount solution as a general option for Bang & Olufsen Turntables. Distributed throughout the World by the Bang & Olufsen store network, the STB option adds to the diversity of mounting options and positions available.

»Wall Mounting Bracket

Wall Bracket / Shelf for BeoGram

A universal shelf that will support all Bang & Olufsen turntables from the past 30 years. Including three cable entry points to allow you to bring cables from below the shelf or through the wall.

BeoGram 1000 Product Specifications

Type: 5202 (1965 – Dec 1971)
Type: 5203 (1965 – Dec 1973)
Type: 5229 (1965 – Dec 1973)
Type: GB 5212 (1965 – Dec 1973)
Type: V 5223 (1965 – Dec 1972)

Designer:

Manufactured: 1965 – 1973

Colours: Rosewood, Teak

Voltage: 110 – 220 V AC
Power consumption 10 W

Speeds: 45 and 33 rpm
Rumble Better than 55 dB (DIN B)
Wow and flutter +/- 0.15 % peak value Pickup arm: ST/L 15°
Cueing device: built-in
Pickup SP 14A
Recommended tracking force 1.5 – 2.5 kg
Specifications: Dimensions W x H x D: 35.8 x 13.5cm (approx. 16cm with dust cover) x 30.8cm
Weight 6 kg

RIAA amplifier could be built-in

Upgrade your membership to view documents​

    Type

Language

    Type

Brochure

EN

BeoGram 1000 Brochure

User Guide

EN

BeoGram 1000 User Guide

Service Manual

Multi

BeoGram 1000 Service Manaul

Service Manual

EN

BeoGram 1000 Service Manaul

Service Manual

Multi

BeoGram 1000 Service Manaul

BeoLab 2500

BeoLab 2500 BeoLab 2500 are active loudspeakers designed to match the BeoSound Ouverture and the…

BeoSound Ouverture

BeoSound Ouverture “BeoSound Ouverture: the design may be a Bang & Olufsen classic, but BeoSound…

BeoCenter 2300

BeoCenter 2300 Beocenter 2300 was dedicated to the CD enthusiast who, for example, like to…

BeoCord 5500

BeoCord 5500 As part of Beosystem 5500, this advanced tape recorder was as close to…

Posted on

BeoGram 1001

BeoGram 1001

BeoGram 1001

The Beogram 1001 was a slightly updated Beogram 1000. The major change which you may notice is the lack of the name on the front of the cabinet. You may then notice the lack of a 78 rpm setting and finally the cartridge changed to the SP14 rather than the SP6/7. Performance was however just the same – surprisingly good but poor isolation from external vibration. The lid was just as useless as before and did not allow it to be left on during playback.

Mounting Options

Bang & Olufsen’s preferred supplier for brackets and stands, STBbrackets, have made a wall mount solution as a general option for Bang & Olufsen Turntables. Distributed throughout the World by the Bang & Olufsen store network, the STB option adds to the diversity of mounting options and positions available.

»Wall Mounting Bracket

Wall Bracket / Shelf for BeoGram

A universal shelf that will support all Bang & Olufsen turntables from the past 30 years. Including three cable entry points to allow you to bring cables from below the shelf or through the wall.

BeoGram 1001 Product Specifications

Type: 5101 (1973 – Dec 1974)

Designer:

Manufactured: 1973 – 1974

Colours: Rosewood, Teak, White

Speeds: 45 and 33 rpm., with provision for vernier adjustment of speed
Rumble Better than 55 dB (DIN B)
Wow and flutter +/- 0.15 % peak value

Pickup arm: ST/L 15°
Pickup SP 14 A
Recommended tracking force 1.5 – 2.5g

Voltage: 220 volts AC
Power consumption 10 W

Dimensions W x H x D 36 x 11.5 (approx. 12.5cm with dust cover) x 31cm
Weight 6 kg

Upgrade your membership to view documents​

    Type

Language

    Type

N/A

English

BeoGram 1001

View


BeoGram 8000

BeoGram 8000 In 1973, Bang & Olufsen launched the world’s first record player with an…

BeoCord 1101 (1975)

BeoCord 1101 (1975) The fact that the Beocord 1100 was equipped with Dolby B Noise Reduction system…

BeoGram 4000C

BeoGram 4000C The original iconic turntable which set the standard for all record players that…

BeoCord 1200

BeoCord 1200 Beocord 1200 Type 4207 was a reel-to-reel tape recorder. Among its features it…

Posted on

Designer – Henrik Sørig Thomsen

Designer – Henrik Sørig Thomsen

Designer – Henrik Sørig Thomsen

Bang & Olufsen does not need to engage high profile international design studios to create its designs. Even large, internationally recognised companies like the Danish hi-fi and video manufacturer can work with young and almost unknown Danish designers such as Henrik Sørig Thomsen MDD. As long as the talent is there, there is no limit or boundaries to what can be done. The association between the company and the designer started when Henrik Thomsen, who was then studying at the Danish School of Design went to Bang & Olufsen for a period of practical training. He has continued to work with them ever since.

Sørig Thomsen Design has produced a wide range of telephone products for Bang & Olufsen. BeoTalk 1100 is just one of them – an answering machine of the highest quality, in contrast to many of the cheap models imported from the Far East. It can be placed on a table or desk, or mounted on the wall. Like so many other Bang & Olufsen products, its functions are divided up into primary functions, which are visible all the time, and secondary functions, which are concealed behind a panel, and are only for ‘special occasions’.

Thomsen studied social sciences, built houses and looked after the gardens on the roof of the Danish central bank before becoming a designer at Bang & Olufsen.

“I suppose I’m an unusually typical example of the generation that was young at the start of the 1980s” he says. “We didn’t really know what it was we wanted to do so we ended up dabbling in all sorts of things. As I see it, that mix of the practical and the intellectual made us more rounded people.”

Thomsen himself swapped a place at Aalborg University for a carpenter’s workbench. After a few years building furniture and houses, he hung up his hammer and did a brief stint as a gardener on the roof of the Danish central bank before coming back down to earth to spend the money he’d earned on a cycling trip from Lisbon to Denmark. In 1990 he headed instead for the Danish School of Design in Copenhagen and it was while he was studying there that he convinced Telecom to take him on for work experience.

“We went to Bang & Olufsen on a study visit” says the 37 year-old from Northern Jutland. “We had a look round Telecom too and that’s where I got the idea of asking for a work placement.” A blessing in disguise.

Today Thomsen has his own Design Studio in Århus, Denmark’s second city, but most of his time and energy is devoted to projects for Bang & Olufsen Telecom and Bang & Olufsen Technology.

The fact that there was no computer available for the placement student when he arrived may well have been fortuitous. It meant that Thomsen spent most of his time working with physical models in the model workshop, converting pencil strokes into three-dimensional solutions. He now works in wood, foam and ‘Cibatool’: a professional modelling material.

“I like working with models” he says, “which could be because I have a practical approach to the subject.”

Even during his three-month placement he tried his hand at various projects, his first being the BeoCharger for the BeoCom 9500, created in the Telecom workshop. Apart from the materials, it ended up looking almost exactly like Thomsen’s first sketch. During his placement he also designed various telephone accessories. Completely afresh.

When his five-year course at design college came to an end, Thomsen was contacted by Bang & Olufsen design and concept manager Ole Mølbjerg who was keen to take him on to work on a new project. Mølbjerg has been Thomsen’s mentor for every Bang & Olufsen project he has worked on since. The first was the BeoTalk 1100, which, to begin with, wasn’t even a clearly-defined product.

“It was exciting because with this product there were no preconceptions,” says Thomsen. “There was no archetype which you could put in front of you and say ‘This is what an advanced answering machine should look like’. It left the field wide open to invent a whole new language of design.For me it’s important that the design illustrates what the product can do. It’s about using design as a language, which also makes the product easier to use.”

Development projects are run by groups of audio experts, designers and software developers:

“It’s an exciting process which is all about daring to be honest with each other – taking constructive criticism on board is the key to obtaining the best results.As I see it, products should have a kind of poetry to them,” continues Thomsen, “but I know full well that it’s not something a designer can just decide. It’s up to the owner to see the product as something poetic – all I can do is hope that it happens.”

Ideally, poetry is expressed by the products being able to speak for themselves, conveying in a simple way what they contain and what they do.

“I think that my generation, which has now grown up into potential purchasers, is making greater demands in terms of the real content of products. They have to be environmentally friendly and speak to our aesthetic sense and our intellect.”

Thomsen thinks it’s important for Bang & Olufsen’s products to retain the universal values inherent in the marriage of functionality and design – a marriage which is both ahead of its time and rooted in history.

“So it’s important to me that the products which are created are made well, and are beautiful and functional.” At the same time, the quality of Bang & Olufsen products is also part of thinking green, because a long product life helps to limit the consumption of resources – a factor which Thomsen believes consumers will continue to demand in the future.

Thomsen has also worked on the BeoCom 6000, BeoCom 9800 and BeoCom 4. Besides telephones, he has also had projects for Technology and designed kitchen equipment, furniture and speakers for another manufacturer. Not bad for someone who became an internationally recognised, prize-winning designer almost completely by accident

Posted on

Designer – Henning Moldenhawer

Designer – Henning Moldenhawer

Designer – Henning Moldenhawer

Amongst many other successful Bang & Olufsen creations, Henning Moldenhawer was responsible for the revolutionary Beomaster 900 – a long, low and fully transistorised mains radio, which played immediately – with no warm-up necessary, as was the case with the radio tubes – was an achievement in itself. In addition, the design concept challenged all established ideas for radio design. The new Beomaster 900 marked a revolution.

It was the architect Henning Moldenhawer who, for the first time in the history of radio, extended the front all the way out to the sides of the unit, breaking with the traditional framing of the front which all radios, TVs and loudspeakers had been using until then. This motif was retraced in Bang & Olufsen’s future design language. It was even repeated graphically in the company’s advertisements.

Beomaster 900 became a European-wide success. At the same time – and much to the company’s surprise – its share of the Danish market did not fall. On the contrary, it rose significantly – at a time when the last of the remaining Danish manufacturers went to the wall. Proof indeed that design is not only for connoisseurs, but is a universal language, at least when applied with talent and as an expression of the product’s conceptual content, i.e. making the product itself a communicator.

Here, in addition, we also have a short Biography of Henning Moldenhawer, kindly submitted to BeoWorld by Mr Steen Rønn.

This was translated from Danish, so please forgive any grammatical errors!

Henning Moldenhawer was born in 1914, the Son of a forest supervisor in the Frijsenborgwoods at Hammel near Aarhus in Jutland. As a boy he loved to explore the woods and to experiment with the wood he found; one of his favourite occupations was to build pushcars. As a grown up he also had a weakness for cars and motorbikes.

At 11 years old he was sent to boarding school in Sealand but hated the authoritarian form that marked schooling and leisure there. After one an a half years in grammar school it became too much for him : He was longing for the freedom of the woods and stopped attending the school – much against his parents’ will. He then passed an examination after 10th class at the local school in Hammel.

He went to Copenhagen, where he became an apprentice bricklayer, but he left the job before he got his apprenticeship and got a job as boy on a shipyard.

In 1936 he enrolled at the school of architecture in Copenhagen, but he never actually commenced study as his girlfriend discovered she was pregnant. They were married, and he was forced to find a job to make their living. Through a comrade he got a job at an architects office, but moved swiftly when a job at the drawing office of professor Palle Suenson (1904-87, architect, teacher at the architect school from 1934, headmaster of the Royal Academy of Art 1965-65) became vacant.

While working for Palle Suenson he later sent exercises for evaluation and became (on the basis of these) a member of the Academic Architect Society in 1949.

In 1948 he left his job at Palle Suenson’s drawing office as he and a colleaque, Mogens Hammer, wanted to establish their own drawing office. It was difficult to start a new business, and all the time they seeked eagerly for business. Moldenhawer got a contact to the radio- and televisioncompagny Linnet & Laursen (owned by outbreakers from Bang & Olufsen) and got designjobs here. Later followed work for another radio- and tv-factory, Neutrofon, where he created the Guldsegl-tv.

In 1962 B&Os Jens Bang got an eye on Moldenhawer and gave him the task to design the new transistorated mains receiver Beomaster 900. A few more radios followed and after that televisionsets with a so far never seen timeless design.

In 1966 the designer Jacob Jensen didn’t have work for a member of his staff, David Lewis, and Lewis got a job at Moldenhawer’s drawingoffice. Together they designed epochmaking tv-sets for B&O, parallel to Jacob Jensen’s famous radio-designing for B&O. In 1980 Lewis went solo and took the customer B&O with him.

I 1983 Moldenhawer got ill and died after a short sickbed, 69 years old.

Designer – David Lewis

Designer – David Lewis David Lewis was born in London, England in 1939 but has been…

Designer – Henning Dahl-Mikkelsen

Designer – Henning Dahl-Mikkelsen Henning Dahl-Mikkelsen – ‘Mik’ – designed Bang & Olufsen’s well-known logo in…

Posted on

Designer – Jacob Jensen

Designer – Jacob Jensen

Designer – Jacob Jensen

Creating products containing a quiet beauty: ‘His innovations have brought to us an appreciation of aesthetics of daily life’

Jacob Jensen is a product designer with the greatest number of honours and awards in the world. His works are timeless and many of them are on permanent show in museums across the globe. Born in 1926 in the Copenhagen suburb of Vesterbro his career started first as a slaughterhouse apprentice and then an apprentice upholsterer in 1942 at the age of 16.

Working later in his father’s small furniture shop he began his design career by designing beds, chairs and other furniture. One of the chairs designed by him was awarded a prize and encouraged by this achievement and his father, he applied for admission to Denmark’s School of Arts, Crafts in Design. He successful achieved his ambition and was accepted three years later. This was supplemented with an early association with Bernadotte & Bjørn’s drawing office (1954 – 1959), the first industrial design drawing office in Denmark.

He became assistant professor of industrial design at Chicago University (1959-61), partner in the ID firm Latham, Tyler & Jensen, New York/Chicago (1959-61) and set up his own company in Denmark in 1958. Jacob Jensen’s ability to work with shape was quickly combined with his skill at finding solutions to problems of a technical nature.

In 1962 he set up his own drawing office on a hillside sloping down to the Limfjord in North Jutland. It is from here he derives inspiration for his severe, horizontal, minimalist idiom, in which the characteristic qualities of Danish neo-classicism can be discerned in shape and colour. This applies especially to his many works for the electronics firm of Bang & Olufsen, the success of which is to a great extent dependent on the design types developed by Jacob Jensen in the 1960s.

He has created more than 500 industrial products for Danish and foreign companies. His best known works include product design for Bang & Olufsen A/S, among others Beolit 600 (1970), Beogram 4000 (1972) and Beocenter 9000 (1986), an astronomical clock for Max René, office chairs for Labofa A/S, Comet telephone for Standard Electric Kirk (today Kirk Telecom A/S) (1976), toys for LEGO, kitchen appliances for Gaggenau Hausgeräte GmbH, watches, telephone and the Jensen-One cars for Max Rene Ltd and loudspeakers for Dantax A/S.

Awards include the IDSA Award (1978), the Thorvald Bindesbøll Medal (1983), International Design Award, Osaka (1985), Good design, Osaka (1986 and 1989) and the ID Classics Prize (1990). He published his memoirs ‘Anderledes, men ikke mærkeligt’ (‘Different, but not strange’) in 1997.

Jacob Jensen’s association with Bang & Olufsen

Jacob Jensen Design received particular recognition in connection with Bang & Olufsen where Jacob Jensen was chief designer for more than two decades during which time he created an extensive line of audio products in a form language which was innovative and recognised on an international scale.

FACT – Did you know the first piece of work Jensen did for B&O was the Beomaster 1000 version 2? He just changed the colour of the top panel from white to black!

The working relationship between B&O and Jacob Jensen began in 1965 and went on in various forms until 1991. During the years 1965 – 1985 the designer developed the exclusive and aesthetic form language which today, continues to be the basis of B&O’s conceptual and visual platform.

From 1985 to 1989 Jacob Jensen functioned as adviser to B&O on matters of design and strategy. Altogether, Jacob Jensen has designed more than one hundred products for the hi-fi and video company, among them music systems, amplifiers, record players, tape recorders, CD-players, remote controls and loudspeakers. Around 1500 design models were conceptualised.

The majority of these products have been awarded design prizes both nationally and internationally as well as being included in museum collections all over the world.

Design for sound by Jacob Jensen Exhibition (1978)

Many of Jacob Jensen’s design for Bang & Olufsen are included in the Design Collection of the Museum of Modern Art (MoMA) in New York. As one of the few industrial designers in the world, Jacob Jensen was chosen in 1978 by MoMA for a solo exhibition: ‘Design for Sound by Jacob Jensen’. The exhibition included 28 audio products. The exhibition was an exceptional gesture of recognition both for B&O and Jacob Jensen for at that time, the museum had only twice before arranged solo exhibitions of single companies’ products (an Olivetti exhibition in the thirties and a Braun exhibition in the sixties)

His relationship with B&O resulted in a classic form language and a series of products, which alone – as the New York Times concluded in its review of the exhibition at MoMA “are enough to earn him major rank among the 20th century’s industrial designers”.

1978 – a busy year in anyone’s language!

Two of Bang & Olufsen’s passive loudspeakers – Beovox C40 and C75 – designed by Jacob Jensen, were awarded with the Danish ID prize in 1978. Other notable events that year included:

Beogram 4002 was included in the Design Collection at MoMA

B&O received the Excellence prize by the IDSA, USA

B&O exhibition at Jerusalem Museum

New York’s MoMA also chose seven Bang & Olufsen products, designed by Jacob Jensen to be included in their permanent Design Collection as being striking examples of the museum’s criteria for quality and historical importance; designs in fact, which had influenced the twentieth century.

Those products were:

Beogram 1200 turntable

Beovox 2700 loudspeakers

Beomaster 1200 radio / amplifier

Beomaster 3000-2 radio / amplifier

Beovox 3700 loudspeakers

Beolit 400 transistor radio

Beolit 1000 transistor radio

From 1972 through 1991 MoMA has further included 19 of Jacob Jensen’s designs in their Design Collection and Design Study Collection.

Steeling wood

Stainless steel and shiny aluminium products are all well and good, but they are just so … clinical. I’m not sure whether people actually live in those sorts of houses. We all pick up magazines and these are the messages that we’re supposed to aspire to… cold, hard-surfaced rooms devoid of anything that is in ay way personal to us. It makes for cleaning the rooms very easily but the whole aspect of living like this is so unreal.

What appealed to me about Jacob Jensen’s products was that you just wanted to reach out and touch them. You can’t do this with modern hi-fi and video products that Bang & Olufsen is creating… it’s as though they’re objects in an art gallery and you’re almost frightened that if you do happen to get your greasy fingermarks on them, a whole army of Mr Mops and security guards would rush out screaming “Don’t touch! Eyes only!”

Jensen’s products were the antipathy of this – they reached out to you shouting “rub your eyes, fingers and any other part of your anatomy on me. I’m not here just to look good and sound good but to let you stroke and caress me too”.

The warmth of his natural wood veneers warmed the coldest of interior décors… you didn’t need the heating turned up to feel the glow that emanated from them. It was the best of both world really, with sheets of brushed aluminium contrasting gracefully and stylishly against the natural wood; the choice of colour was often yours, from blond oak to rich rosewood which complemented any domestic setting. It’s quite amazing that wood-framed hi-fi and television sets just haven’t gone away. Walk into any Comet or Darty and you can see Far Eastern manufacturers brashly copying the products of the past While B&O still feel a certain amount of smugness in believing they lead the 21st century way, the public speak with their portefeuilles and cashiers’ tills ring with the sale of look-good and feel-good wood products.

Wood will come and go like the tide… once out, the wind of change will blow it back in again.

Below is an interview which Mr Jacob Jensen very kindly undertook especially for BeoWorld and appeared in the Newsletter of early December 2005:

BeoWorld is proud to be able to be associated with Jacob-Jensen Design of Denmark. As a mark of this new cooperation, BeoWorld has been given an exclusive interview with Jacob Jensen, long-time designer of many Bang & Olufsen products such as the Beomaster 1900, the Beovox 2500 Cube speakers and Beosystem 5000.

We are sure that Mr Jensen’s words will be of great interest to collectors of Bang & Olufsen and thank him for his time. We would also like to wish both Jacob and his new wife happiness in their marriage and success in the future!

How did your relationship begin with B&O?

B&O contacted me because I had done a line of audio for General Electric in 1960 and a receiver for the Danish Company TO-R with a design language, which was unique and appealing to B&O.

Which Bang & Olufsen design are you most proud of?

The products, which I did in the seventies were completely different and had a high aesthetic quality. A good example is Beogram 4000 and the Beomaster 1900 line, but also the Beocenter 9000, which I did together with my son Timothy Jacob Jensen, is in many people’s opinion a masterpiece.

Which was the most difficult product to produce, technically and design-wise?

Due to the fact that the products made in the seventies were completely new with a compact height, they were all difficult to construct. For the Beogram 4000 and other products, I had a close relationship with an engineer called K.G. Zeuten, who by the way also constructed aeroplanes. Some of these products were constructed and designed outside B&O. It was necessary because B&O was not able to make it themselves.

Do you own and use Bang & Olufsen products now?

I own and use B&O products at home, and my favourites are the products made in the seventies and eighties.

Which pieces of your work would you most like to see displayed in the BeoWorld Museum?

I would like to see the Beovox Cube, Beogram 4000, Beomaster 1900, Beocenter 9000 and B&O IR remote control wristwatch.

What do you think of the present Bang & Olufsen range?

The present B&O range has a clear connection to the design language and product philosophy I started in the sixties, and I am happy and proud that my former employee, David Lewis has achieved to continue my form language. I believe that this will also be the communication platform for B&O in the future.

Which product designer do you most admire?

In Denmark we had a pioneer designer, Kare Klint, who started the difficult process of combining use and aesthetics for household products. I have always felt a close relationship to him. His philosophy was: Form follows function, compared to ours, which is more: Form follows feelings.

Do you see any future cooperation with B&O?

I would like to make the next breakthrough at B&O, but my experience tells me that it takes years and a lot of power to do, therefore it is up to the next generation.

What are you doing now that you have retired?

I think that creative people will never retire, so therefore I am still doing some designs for JJD Studio, which my son, Timothy Jacob Jensen is successfully running. Beside that, I am painting, writing, playing instruments and having a wonderful time with my young and beautiful wife, whom I married five months ago.

His favourite product was the Beogram 4000.

Posted on

Designer – David Lewis

Designer – David Lewis

Designer – David Lewis

David Lewis was born in London, England in 1939 but has been living in Denmark since the 1960s. He attended London’s Central School of Art 1957 – 60 and joined Bang & Olufsen as a freelance designer in the mid 1960s. He was awarded a Royal Society of Arts Bursary, 1960. His main fields of activity are those of industrial design and product development.

He was first employed by two of B&O’s former designers, Jacob Jensen and Henning Moldenhawer, designing audio and video equipment for B&O. He then started his own studio in the early seventies.

The distinguished title of “Royal Designer for Industry” (RDI) was bestowed on him in November 2001 by the Royal Society for the Encouragement of Arts, Manufactures & Commerce. The distinction is conferred upon UK citizens who have attained eminence in creative design for industry. The number of people who may hold this distinction at any one time is limited to 100.

David Lewis, who has his own design studio in Copenhagen, has received innumerable Danish and international prizes and marks of honour – and has a great deal of the credit for the design trend which has made Bang & Olufsen internationally known.

“To me it is great honour to receive this distinction. Having lived more than 35 years in Denmark, it is a recognition from the Royal Society that I am proud of” says David Lewis.

One of the problems which Lewis is constantly working on is that he would prefer TVs to vanish when they are turned off. “A TV without a picture is definitely not a plus when it comes to interior design,” says Lewis. As he sees it, when it’s off, a TV is a cross between an aquarium and an eye peering into people’s living rooms.

Once the set is turned off, the design becomes paramount. When the TV is on, what people look at is the quality of the programme being broadcast. Designing and creating a TV which also has a “life” when it’s turned off is the closest you can get today to giving consumers a good alternative to the empty aquarium.

He also would like to ‘ban the black boxes’: “Our BeoLab range of loudspeakers is a revolt against indifference and heavy wooden boxes humming away in the corners of our homes, dictating the furnishings and the way we live” states David Lewis who still prefers to sketch by hand than working with computers: “Too inhibiting, too complicated to work with” he says

“The Germans introduced matt black in the ’60s and made some wonderful stuff, but the industry has been following blindly ever since. Today, you can hardly tell whether you’re looking at a toaster or a typewriter. On top of that, people have been led to believe that high quality is synonymous with gadgetry and complexity.”

“I believe that the less you complicate things, the more interesting people will find them. Let’s clean up and simplify the technological mess. Let’s go back to original ideas. Let’s do it the Bang & Olufsen way.”

“Who says a loudspeaker should be hidden away in the dark, if it sounds better the closer it is to you? BeoLab speakers have been shaped to stand out from your furniture and to blend in with it. That’s why we use polished aluminium which takes its colour from its surroundings instead of dictating to them.”

“BeoLab 4000, for example, was designed to fit into a bookcase, but it performs equally well on a wall or a window sill. And it’s the first BeoLab loudspeaker to be available in an array of colours. Not just to suit your interior decoration, but because life is full of colour. The days of matt black rule are over!”

Inspiration behind new concepts comes from a combination of very different impulses. Sometimes it might be irritation about how modern technology is used. Other times Lewis might work like a sculptor faced with a slab of stone. Before it becomes a finished work of art, the excess stone ‘just’ has to be chiselled away. “And as soon as I see the solution, I don’t have any doubts,” he says.

However, Lewis’ material isn’t stone, but the materials he has to hand for converting ideas into three-dimensional reality. His models can’t be drawn with pencil and pen. Instead, the initial models are created in cardboard. “When I’m pondering over a problem that I can’t get to work, I get restless and don’t know what to do with myself,” Lewis says. So then he sits down with his pieces of cardboard and tries to find the shape and form of the new product.

Lewis himself attributes Bang & Olufsen’s development of the anti-glare screen to the fact that he was often irritated by the sun reflecting off his TV screen while watching British football on a Saturday afternoon. That was the beginning of the technology which today is one of Bang & Olufsen’s characteristic TV features.

For David Lewis, the inspiration behind new concepts can also come from a desire to make the technological opportunities they offer available to consumers. For example, a BeoSound 9000 with its six CDs in a row means users don’t have to change CDs so often, and they generally don’t listen to more than five or six CDs in any case. At the same time, it’s also intended to be a “family machine” where each individual member of the family can load his or her favourite CD – and see it too.

As we know, Bang & Olufsen wants people to control technology, not the other way round. Similarly, the development of new products is not governed by the very latest technology. “The problem with new technology is that it opens up so many opportunities. Instead of making life easier, it often makes it more complicated because people have more options than they need,” says Lewis. He sees himself as the consumers’ champion.

“So many manufacturers are keen to use all the latest features of modern technology and make everything bigger and faster without necessarily making it better,” he says. “I feel that many producers of home electronics and other new technology are too quick to update their products. They improve the product by 1% and re-launch it immediately – in many cases it would make more sense to wait until they had discovered some new features which consumers really need. But there’s this need to keep moving on and the design of the new products doesn’t matter in the least – of course it isn’t worth putting resources into design when something new will be along in six months.”

“No-one asks consumers whether they want all these options which they might not even need and which, in fact, often frustrate them,” says Lewis.

Another issue which will present a challenge for Bang & Olufsen in the future is that the basic needs of most consumers in terms of technology and tools have already been met.

If we go back a few years, technological innovation was something that changed the way people lived: the refrigerator, the first radios and the first televisions, cars and the first computers.

Today we can see that people are getting bored with new technological developments. There’s always something new being heralded as the best thing since sliced bread, but the manufacturers are just crying wolf.

“What makes Bang & Olufsen something special is that here the concepts must last at least ten years. They wouldn’t be able to do that without content, function and design which lasts the distance,” says Lewis.

Today he doesn’t believe it’s possible to change consumer behaviour with new technology.

“We must adapt our products so that they reflect the changes taking place in society,” says Lewis. He reminds us of the original tradition of the theatre, where the audience was seeking an experience of which they in a way become part. In his opinion, the tradition where consumers actively choose and select their experiences, possibly together with more than just their close nuclear family, will see a renaissance.

“Form is nothing more than an extension of content. And who says that loudspeakers should hide away in corners, if the closer they get to you, the better they sound?”

David Lewis’ first product was Beovision 400. David Lewis has designed all of Bang & Olufsen’s video systems: the LX and MX families, Beosystem AV 9000 and Beovision Avant. Among Bang & Olufsen’s audio range, he has designed Beosystem 2500, BeoSound Century, the remote controls Beolink 1000 and Beolink 5000, the Red Line speakers and the active loudspeakers BeoLab 8000 and BeoLab 6000.

Three of his creations – the video recorder Beocord VX5000, the Beovox Cona sub-woofer and the active speakers BeoLab 6000 – are included in the permanent collection of design at the Museum of Modern Art (MoMA) in New York.

Among many other products, David Lewis has designed fridge-freezers for the Vestfrost company in Denmark and worked for Voss and Electrolux.

During the 2003 financial year, David Lewis was awarded the Danish Design Council’s annual award citing the following reason for its decision: ” According to the articles of association, the annual award must be given to a person who has achieved results of a practical or theoretical interest within one or several areas. David Lewis, Chief Designer at Bang & Olufsen since 1980 and responsible for numerous Bang & Olufsen successes over the past 35 years, is, in every single respect, a worthy recipient of the Annual Award 2003.”

“Chief designer David Lewis has recently received not one, but two great honours. Firstly, he has been created a Knight of the Order of the Dannebrog. The Order of the Dannebrog is the Danish order of knights conferred on Danes and non-Danes who have made a special contribution to Danish interests. Selections are made by the Master of the Order of the Dannebrog,, Her Majesty Queen Margrethe II of Denmark.

The Order of the Dannebrog was established in 1671 and derives its name from the Danish flag, the Dannebrog – the oldest national flag in the world still in use today. Legend has it that the flag with the white cross on the red background “fell from heaven, sent by God” during a battle in Estonia on 15 June 1219, bringing victory to the Danes.

David Lewis also received the 2003 Danish Design Council Award. The purpose of the Danish Design Council is to work to promote Danish industrial design. It awarded its prestigious prize to David Lewis for his contribution to Bang & Olufsen’s many successes over the past 35 years. Moreover, the Director of the Design Council, Steffen Gulmann, observed that David Lewis has also designed refrigerators, laboratory equipment and dental instruments. The prize was awarded at an event at the Danish Design Centre at the beginning of May. Following the award ceremony, the invited audience of just under 200 people had ample opportunity to admire David Lewis’ work for Bang & Olufsen whilst viewing a large number of products on display.”

(From Beolink Magazine 7, September 2003)

Designer – Henning Moldenhawer

Designer – Henning Moldenhawer Amongst many other successful Bang & Olufsen creations, Henning Moldenhawer was…

Designer – Ib Fabiansen

Designer – Ib Fabiansen Inspired by the Danish furniture industry’s success in the 1950s, B&O…

Designer – Henning Dahl-Mikkelsen

Designer – Henning Dahl-Mikkelsen Henning Dahl-Mikkelsen – ‘Mik’ – designed Bang & Olufsen’s well-known logo in…

Posted on

Designer – Ib Fabiansen

Designer – Ib Fabiansen

Designer – Ib Fabiansen

Inspired by the Danish furniture industry’s success in the 1950s, B&O tried out various Danish designers. Unit furniture was designed by the architect Ib Fabiansen in 1959. The Building Furniture concept combined television and audio in one unit. These modular furniture units were exhibited at the Danish Arts & Crafts Exhibition in Charlottenborg, Copenhagen, 1958.

Among others, Fabiansen designed the Beocord Belcanto Type 608 (1962) and the Horisont Television (1962).

“… there was a time when it was far from a certainty that a radio from Bang and Olufsen was a study in good design… “It was horrible, simply horrible,” says architect Ib Fabiansen, who was the first architect to begin to designing radios for the little factory in Struer. Together with Jakob Jensen, B&O’s in-house designer for many years, he tells the story of a West Jutlandic factory, which wasn’t wasn’t the least bit interested in shape and design at the beginning.” (Fra baggård til big business: Verdens Pæneste Lyd, Danish Radio 2, 17.11.02)

Ib Fabiansen’s firm maintains an office in Frederiksberg, an independent city within the boundaries of Copenhagen. Fabiansen himself designed at least one house in Frederiksberg.

Notes:

Pictured – Ib Fabiensen demonstrates the flexibility of his modular system in 1959.