Multicare, Author at Beoworld

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 150

At the base of the BeoLab Penta column was the BeoLab 150 amplifier with a power output of 175 watts DIN/IEC. This could give your music a tremendous boost, both to the quality and the actual power output. It was ideal if you loved to party but had a relatively small music system. Big power needs careful control – so the amplifier was equipped with Bang & Olufsen’s Dynamic Soft Clipping system. This was a circuit that prevented both distortion and damage to the speaker units by softly rounding off signals that were too powerful. Another circuit prevented damage due to prolonged overloading.

BeoLab 150: Controlled overdrive

On the amplifier itself were buttons for adjusting bass and the level of sensitivity. This meant that you could arrive at a permanent adjustment that matched the room exactly.

BeoLab Penta turned on automatically when it received a signal and also turned itself off three minutes after receiving the last signal. BeoLab Penta had a light display that indicated the volume level and which sound source the music was coming from. This was especially useful with Beosystem 5500 and Beocenter 9500.

BeoLab 150 and 200 were used as part of the BeoLab Penta active loudspeakers range.

Connections:

At the bottom of BeoLab 150 were two clip-sockets and a four pole DIN socket for connecting speakers, a line input phono socket and a mains cable.

BeoLab 150 Product Specifications

Type Number

Type: 1721 (1986 – Dec 1988)
Type: AUS 1725 (1986 – Nov 1987)
Type: GB-N 1722 (1986 – Dec 1988)
Type: J 1724 (1986 – Dec 1988)
Type: USA 1723 (1986 – De 1988)

Designer

Designer:

Manufactured

Manufactured: 1986 – 1988

Colours

Colours: Grey

Specification

Specifications: Power output 20 – 20,000 Hz IHF 1 x 150 watts / 8 ohms
Power output RMS DIN/IEC 1 x 175 W / 8 ohms
Power output music 1 x 225 W / 8 ohms
Total harmonic distortion < 0.015 %
Intermodulation distortion IHF < 0.02 %
Wideband damping factor IHF 150
Dynamic headroom IHF > 1.5 dB / 8 ohms
SN A-weighted 1 W IHF > 78 dB
S/N A-weighted 150 W > 100 dB
LINE input 80 mV / 1W, 10 V / 150 W, 150 Kohms
22 Kohms, phono plugs

Speaker input
800 mV / 1 W, 10 V / 150 W, 15 Kohms
DIN 4-pin or spring loaded contacts
Bass level switch Linear, +3 dB / 40 Hz, +6 dB / 40 Hz
Sensitivity switch 0 dB, -3 dB, -6 dB

Power supply:
1721: 220 V
1722/1725: 240 V
1723: 120 V
1724: 100 V
Power frequency 50 – 60 Hz
Dimensions WxHxD: 25 x 13 x 25cm
Weight 7kg

Upgrade your membership to view documents

Type	Language	Type
Service Manual	EN	BeoLab 150 Service Manual	View label

BeoCord 2400 (1969)

BeoCord 2400 (1969) “What Advantages does your Beocord 2400 give you in the Form of…

BeoCord 5500

BeoCord 5500 As part of Beosystem 5500, this advanced tape recorder was as close to…

BeoGram 1200

BeoGram 1200 Beogram 1200 – Types 5213, 5214, 5216, 5217 – was Bang & Olufsen’s…

BeoLab 50

BeoLab 50 High-end active loudspeaker blending radical audio technology with graceful aesthetics and meticulous craftsmanship.…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 3

BeoLab 3 is the most compact, versatile loudspeaker in the current Bang & Olufsen range of loudspeakers. Using both ICEPower® and Acoustic Lens Technology, BeoLab 3 represents an important expansion of Bang & Olufsen’s compact loudspeaker range.

The speaker is very versatile and comes with a selection of stands – a floor stand, table stand and wall brackets are all available – which makes it ideal for placing almost anywhere in the house.

BeoLab 3 Floor Stand: Part number 1216511

BeoLab 3 Wall Bracket: Part number 1216766

BeoLab 3 is delivered with a black rubber foot for positioning on a static unit. A new type of PowerLink cable (Mark III) is provided with the speaker (5m) but additional lengths may be purchased separately if required. There is a single PowerLink socket on each BeoLab 3; if connecting to a non-Bang & Olufsen audio system a converter cable may be used to connect at line level.

The speaker fits in price-wise between BeoLab 6000 and BeoLab 8000. It can be used for either main speakers or for rear surround-sound. Its rated output is 250W. The unit looks similar to the BeoLab 2 sub-woofer. The Acoustic Lens Technology is developed from research with the BeoLab 5 active speaker; technology of which was developed in close cooperation with Sausalito Audio.

BeoLab 3 Press Release – January 2004

BeoLab 3: a new, compact loudspeaker with a surprisingly big sound

Bang & Olufsen’s latest loudspeaker is a minor acoustic masterpiece. With its compact dimensions, it fits in anywhere – and it has a surprisingly big sound for its size. “I’m very pleased to introduce our latest loudspeaker, BeoLab 3. It incorporates many of the technological features of our existing loudspeakers, including our top-of-the-range model BeoLab 5, which has been met with a tremendous enthusiasm from the international trade press. The many ways in which BeoLab 3 can be used and positioned will make these features more widely available, so more people can benefit from them” says President and CEO Torben Ballegaard Sørensen

BeoLab 3 is a highly versatile loudspeaker. It can be positioned in many different ways. Using the stand and fittings supplied, you can mount the loudspeaker on the wall or put it on a shelf or in a bookcase. You can also put BeoLab 3 wherever you like on the floor on its aluminium stand, the design of which matches the rest of Bang & Olufsen’s products. Depending on their use and the décor of the room, the loudspeakers can be placed to emphasise their distinctive design or so that they blend in with the surroundings. At the same time, the complex technology that produces its surprisingly big sound makes BeoLab 3 an obvious choice when it comes to stereo loudspeakers for your music system or the front and rear loudspeakers of a surround-sound home cinema set-up.

Greater acoustic freedom

A rather striking feature of the design is the acoustic lens on top of BeoLab 3. One advantage of the Acoustic Lens Technology* is that it permits greater freedom as regards positioning without impairing the sound quality and it also limits sound reflections from the floor and ceiling, delivering more precise reproduction. Creating such a big sound with such small loudspeakers was possible only by using a combination of Bang & Olufsen’s skills in the field of acoustics. The sides of the loudspeaker function as additional, passive speaker units and allow BeoLab 3 to move greater quantities of air (and therefore to reproduce lower notes) than would otherwise be possible in such a small, compact cabinet.

The built-in Bang & Olufsen ICEPower® amplifier modules guarantee the necessary power without generating the degree of heat given off by traditional amplifiers. BeoLab 3 was designed by Bang & Olufsen’s Chief Designer David Lewis, and besides its acoustic lens, the loudspeaker is also designed along the same lines as BeoLab 2, Bang & Olufsen’ s subwoofer, in terms of shape: a combination of a cube and a sphere. The cabinet is made of aluminium, with a matt black surface.

Mounting Options

From launch, BeoLab3 was available with circular desk mounting hoops, floor stands with internal cable routing and table stands.

BeoLab 3 Product Specifications

Type Number

TYPE: EU 6891 2004-01
TYPE: GB 6892 2004-01
TYPE: USA-CDN-TWN 6893 2004-01
TYPE: J 6894 2004-01
TYPE: AUS 6895 2004-01
TYPE: KOR 6896 2004-01

Designer

Designer: David Lewis

Manufactured

Manufactured: 2004 – present

Colours

Colours:

Specification

Dimensions Length 16,2 cm
Width 13,5 cm
Height 21,5 cm; 22,3 cm on table ring
Weight 2,55 kg
Cabinet finish Silver and black
Power consumption IEC65: 20 W
Typical: 7 W
Stand-by: 0,2 W
Maximum Sound Pressure Level 94 dB (stereo, pair)
Power amplifier, bass 125 W, Class D, ICEPower
Power amplifier, treble 125 W, Class D, ICEPower
Long-term maximum output power
per amplifier Bass: 220 W/4ohm
Treble: 120 W/8ohm
Effective Frequency range 50 – 20.000 Hz
Crossover frequency 3.300 Hz
Cabinet principle Double Balanced Passive Radiator
Net volume, bass 1.5 litres
Magnetically shielded Yes
Woofer 101,6 mm
Passive radiators 2 x 101,6 mm
Tweeter 19 mm
Directivity control treble ALT (Acoustic Lens Technology), licensed from Sausalito Works LLC
Bass equalization ABL (Adaptive Bass Linearization)
Input sensitivity (Power Link) 125 mV (88dB SPL)
Input sensitivity (line) 125 mV (88dB SPL) – Auto switch on
Switch off time (line) 3 min.
Indicator LED for on (green), Off (red) or Protection (yellow) mode
Operation Free, Wall or Corner position
Left, Right or LINE switch
Protection Thermal protection

Connections:
Power Link 1 (use Semi-Balanced PL cable type MKIII, or fully mounted PL cable)
Mains 1 Switch Mode Power Supply; internal jumper for 220-240 V or 100 – 120 V
Phono (line-in) Via PL using Line-to-PL adaptor cable, 5m, black, part no.: 6270856

Market specifications:
Type Market Voltage
6891 EU 230 V
6892 GB 230 V
6893 USA – CND – TWN 120 V
6894 J 100 V
6895 AUS 240 V
6896 KOR 220 V

Accessories:
Base stand Included
Floor stand 2165 Aluminium
Table stand 2166 Aluminium
Wall bracket 2167 Black

Upgrade your membership to view documents

Type	Language	Type
User Guide	EN	BeoLab 3 User Guide	View label
Setup Guide	NL	BeoLab 3 Setup Guide	View label
Service Manual	EN	BeoLab 3 Service Manaul	View label

BeoCenter 3600

BeoCenter 3600 The first Beocenter with three sources, the 3600 was released in only a…

BeoGram RX

BeoGram RX A basic radial armed turntable which replaced the Beogram 1800 in the range.…

Beo1

Beo1 ” Absence can be the most expressive form of presence. Especially when it comes…

BeoCord 6500

BeoCord 6500 A light touch to the front of the Beocord 6500 cassette recorder released…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 4

“BeoLab 4 is a compact, flexible loudspeaker concept at a highly attractive price point. In addition to its use with the BeoSound 4 music system, BeoLab 4 can also be combined with PCs or be part of other Bang & Olufsen music systems. Offering a large number of positioning options, BeoLab 4 is scheduled for initial roll-out in the second quarter “- taken from Bang & Olufsen’s Financial Report, August 2005 .

BeoLab 4 was launched in November 2005 as a new entry-level loudspeaker concept. They are designed to be discreet yet offer exceptional performance for their size. They can be used as stereo loudspeakers with an audio system, as front or rear loudspeakers within a surround sound set-up, and as link room loudspeakers or with a computer.

BeoLab 4 are 2-way stereo loudspeakers with a 2cm tweeter and a 10 cm bass loudspeaker. Each driver is powered by a 30 Watt ICE power amplifier. They also feature a placement switch to adapt the bass performance depending on their position in the room. This is similar in operation to BeoLab 2 with a wall-mounted, corner or free-standing position. In line with the versatile concept, BeoLab 4 adapts its bass performance to the specific placement in the room. A switch is set to match a wall-mounted position, a corner position or a free-standing position to ensure optimum performance. BeoLab 4 features Adaptive Bass Linearization (ABL), Bang & Olufsen’s proprietary technology for ensuring superior bass performance from loudspeaker cabinets with modest physical dimensions.

Pyramid power to super charge your laptop

With a 3.5 mm mini jack Line input, dedicated PC mode and low price, BeoLab 4 is a realistic solution to be sold with non B&O masters such as PCs or as even for portable MP3 players There are two new adaptors to support connection to these sources:

6270273 2 – piece set of 3.5 mm mono mini plug > RCA M, for BL4 w/ non B&O system.

6270250 3.5mm stereo mini plug > 2 x 3.5 mono mini plugs for PC connected to BL4s

Placement

To support the versatility of the loudspeaker, BeoLab 4 is supported with a range of stand options. On its built-in foot, BeoLab 4 can easily be placed on a bookshelf or a table. Furthermore, BeoLab 4 can be mounted on the wall or to the ceiling by means of the optional wall and ceiling brackets. Finally BeoLab 4 can be placed on a dedicated floor stand.

Colour options

The covers are made of a special fabric and will be available in 4 different colours – Black, Dark Grey, Red and Blue. Thanks to a simple snap-on system, it is easy for the customer to change to another colour if required.

With the release of the BeoLab 4 loudspeaker, Bang & Olufsen has once again shown that excellent sound is wonderfully compatible with the design and crafting of a compact and intriguing cabinet. BeoLab 4 will be available towards the end of 2005. Despite its modest size, the pyramid-shaped BeoLab 4 is a true hi-fi loudspeaker, with the amplifier built in to the loudspeaker unit and a range of Bang & Olufsen proprietary acoustic technologies ensuring the best performance. In terms of design and placement options, BeoLab 4 is the perfect accompaniment to the new BeoSound 4 audio system, and the small dimensions suit well as rear speakers for home cinema, or as superbly performing PC loudspeakers.

Flexibility is the key

“In today’s audio market, flexibility is central to our business. Our customers expect to be able to hear music wherever they may be, without any diminishment in quality,” says Michael Jensen, Product Manager, Bang & Olufsen. “BeoLab 4 complements our other BeoLab loudspeakers and sound solutions by ensuring that listening experiences from the living room to the bedroom or home office are of an equally high quality.”

It is often unnecessary to use large loudspeakers as the rear speakers for home cinema, and BeoLab 4 can fill this role. Furthermore, BeoLab 4 has a dedicated PC mode, making it a superbly performing PC loudspeaker. Bang & Olufsen’s well-known BeoLink system ensures the total integration of all entertainment at home, and BeoLab 4 is a great solution for remote loudspeakers that can be placed discretely around the house and linked to home entertainment systems.

A perfect blend of expression and technology

BeoLab 4 is available with a range of stand options for the wall, floor or table that complement the stands for the new BeoSound 4 audio system. BeoLab 4 can even be tastefully hung from the ceiling, and the cloth covers are available in four colours. Three bass presets ensure that BeoLab 4 performs according to its placement in a room – whether in a corner, against a wall, or free-standing in the room.

BeoLab 4 is, like all BeoLab loudspeakers, an active loudspeaker, meaning that the amplifier unit is placed in the cabinet to ensure no deterioration of signal strength between the amplifier and loudspeaker unit. The ICEpower amplifier unit used is a patented Bang & Olufsen solution, allowing for an ultra-compact design, high power output, and cool operation. Adaptive Bass Linearisation, another proprietary Bang & Olufsen technology, offers superior bass performance from modestly- dimensioned loudspeaker cabinets. In addition, circuit protection technology ensures BeoLab 4 never overheats.

Mounting Options

BeoLab4 were conceived as a table top speaker with optional floor stands featuring a stainless steel turned pole. Cables could not be internally routed within the stand and so a silver sock was supplied, which proved not to be popular.

BeoLab 4 Product Specifications

Type Number

Designer

Designer: David Lewis

Manufactured

Manufactured: 2005 – ?

Colours

Colours: Black, Red, Blue, Grey

Specification

Part numbers:
BeoLab 4 1665000
BeoLab 4 cover red 1604244
BeoLab 4 cover black 1604246
BeoLab 4 cover blue 1604248
BeoLab 4 cover dark grey 1604249
Ceiling bracket 1217711
Floor stand 1217811
Wall bracket 1217911
Cable for PC connection 6270250
Cable Pack (2 x PowerLink and 2 x mains) 3375562

Specifications:
Designer David Lewis
Dimensions/weight 21.5 x 19.7 x 20.5 cm / 1.7 kg
Cabinet/cloth finish Black, dark grey, red and blue
Power consumption Typical 7 W, standby 0.5 W
Power amplifier 35 watts, Class D, bass and treble
Cabinet principle Bass reflex
Woofer 10 cm concave diaphragm
Tweeter 1.9 cm fabric dome
Cabinet volume 1.55 litres
Bass equaliser Adaptive Bass Linearisation (ABL)
Connections Power Link (one); Line/PC (mini jack)
Accessories Aluminium floor stand, ceiling bracket, and wall bracket

Upgrade your membership to view documents

Type	Language	Type
Setup Guide	NL	BeoLab 4 Setup Guide	View label
User Guide	EN	BeoLab 4 User Guide	View label
Service Manual	EN	BeoLab 4 Service Manual	View label
PC Service Manual	EN	BeoLab 4 PC Service Manual	View label
Wall Bracket	EN	BeoLab 4 Wall Bracket	View label
Floor Stand	EN	BeoLab 4 Floor Stand	View label

BeoCord 1600 (1969)

BeoCord 1600 (1969) Beocord 1600 Type 4205 was a reel-to-reel tape recorder. Among its special…

BeoCord 2400 (1969)

BeoCord 2400 (1969) “What Advantages does your Beocord 2400 give you in the Form of…

BeoCord 900

BeoCord 900 Beocord 900 was the simplest of Bang & Olufsen’s range of cassette-recorders. Your…

BeoLab Penta

BeoLab Penta These tall and elegant speakers were developed according to a totally new acoustic…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 19

Beolab 19 delivers exceptional bass to enhance the mood and depth of cinematic experiences by channeling the raw impact of its stunning power. To top it off, the freedom of wireless simplicity and the ability to compensate for physical placement in the room allows you to find the perfect spot for the Beolab 19 in your home.

Reach peak performance

Add extra depth and uncover new details in films and music with this progressive subwoofer. It’s not just the distinctive design that gives Beolab 19 its impact. Every technical detail is engineered to capture the precise emotions in even the lowest frequencies.

Accurate wireless sound

You can place Beolab 19 anywhere you want. The subwoofer is equipped with the innovative wireless WiSA technology that brings unprecedented levels of stability and precision to your home audio setup and seamlessly connects with all WiSA-compliant speakers and TVs.

Surprising symmetry

Where most other subwoofers are designed with unpleasing aesthetics, Beolab 19 brings its own distinctive style to your surroundings. The geometric form and solid aluminium exterior produce a sculptural character, true to its forceful nature.

BeoLab 19 Product Specifications

Type Number

Designer

Designer: Jakob Wagner

Manufactured

Colours

Specification

Power Amplifiers (per speaker): 2 x 160 watt, Class D, woofers

Speaker Drivers (per speaker): 2 x 8” woofers

Bass Capability @1m: 98 dB SPL

Frequency Range: 18 – 1,200 Hz

Power Supply

Power supply built-in
Power cable included

Advanced Sound Features

Connections

1 x Powerlink (RJ45)
1 x RCA (L/R)
Wireless Powerlink
- Wireless Power Link (24 bit / 48 kHz)
- WiSA (24 bit / 48 kHz)

Product dimensions W x H x D: 34.8 x 33.4 x 29.3 cm
Weight: 15.4 kg
Placement: Floor
Recommended Room Size: 10 – 50 m²

Upgrade your membership to view documents

Type	Language	Type
Data Sheet	EN	BeoLab 19 Data Sheet	View label
Service Manual	EN	BeoLab 19 Service Manaul	View label

BeoLab 8

BeoLab 8 Compact and powerful as a surround, stereo, or standalone speaker, Beolab 8 adapts…

BeoGram 1000

BeoGram 1000 superbly designed, tastefully styled The turntable and overall design was by Jacob Jensen;…

BeoGram 1100

BeoGram 1100 The most basic of a new range of beograms, this model was amongst…

BeoCord 6000

BeoCord 6000 Beocord 6000 measured 53cm wide x 13cm high (24,5cm with lid open) x…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 18

The culmination of over 25 years of design and innovation, the Beolab 18 introduces a refined symbiosis of form, craftsmanship, and performance Inspired by the legendary Beolab 8000 loudspeaker, it honours a classic silhouette with new heights of performance and flexibility. Beolab 18 requires just a power cable to unleash multi-channel wireless audio throughout the space.

Discover the impeccable experience of wireless Bang & Olufsen sound. Needing just a single power cable to perform, the speaker brings incredible opportunities to unleash the joy of multi-channel wireless audio in your home.

Any spot is the right spot

The slender speaker leaves a surprisingly small footprint. It’s designed to fit and blend in almost anywhere, regardless if you are looking for a freestanding floor speaker, want to tuck it in a corner or hang it on your wall like an artwork.

A poetic expression of sound

The aluminium pillar balances almost magically on its pointed base, while the crafted wooden lamellas appear to be fanning out the sound across your room in concert with the acoustic lens on top. Meet design and engineering in perfect harmony.

Design-driven innovation

Beolab 18 is a stunning work of design engineering with audio performance at its heart. The acoustic lens evenly distributes the upper frequencies in a 180-degree horizontal arc, delivering superior sound experiences across your room, not just in front of your speaker.

All the little big things

Behind its beautiful exterior, Beolab 18 is filled with advanced audio technologies. Adaptive Bass Linerisation automatically adjusts the bass performance to what you are playing, while the room adaptation feature optimises the sound based on your speaker’s placement.

BeoLab 18 Product Specifications

Type Number

Designer

Designer:
David Lewis Designers
Torsten Valeur

Manufactured

Colours

Body: Natural aluminium
Lamellas: Oak

Body: Black anthracite aluminium
Lamellas: Dark oak

Body: Gold Tone aluminium
Lamellas: Light oak

Body: Natural aluminium
Lamellas: White plastic

Body: Black aluminium
Lamellas: Black plastic

Specification

Power Amplifiers (per speaker)

1 x 160 watt, Class D, tweeter
1 x 160 watt, Class D, woofer

Speaker Drivers (per speaker)

1 x 3/4” tweeter
2 x 4” woofer

Maximum Sound

Pressure Level @1m: 107 dB SPL (pair)
Bass Capability @1m: 83 dB SPL (pair)

Frequency Range

39 – 23,500 Hz

Power Supply

Power supply built-in
Power cable included

Advanced Sound Features

Acoustic Lens Technology
Thermal Protection
Adaptive Bass Linearization
Acoustic Placement Settings

Product dimensions W x H x D

On the floor: 20 x 132.4 x 20 cm
Wall mounted: 15.5 x 132.6 x 13.5 cm

Weight

9.2 kg (without base or wall bracket)

Placement

Floor
Wall mounted

Recommended Room Size

10 – 30 m²

Connections

2 x Power Link (RJ45)
Wireless Power Link (24 bit / 48k)
1 x RCA (L/R)
1 x TOSLINK:
- in: Sample rate 32k, 44.1k, 48k, 96k/PCM16-24 bit
- out: Sample rate 48k/PCM 24 bit

Wireless Powerlink

Wireless Power Link (24 bit / 48 kHz)
WiSA (24 bit / 48 kHz)

Streaming Formats With Beosound Core

Chromecast built-in
Apple AirPlay 2
Bluetooth Audio Streaming
Spotify Connect

Upgrade your membership to view documents

Type	Language	Type
Data Sheet	EN	BeoLab 18 Data Sheet	View label
Service Manual	EN	BeoLab 18 Service Manual	View label

BeoCord 5000 (1984)

BeoCord 5000 (1984) A top-quality cassette recorder, perfectly matched to Beomaster 5000 as part of Beosystem 5000.…

BeoLit 609 FM Export II

BeoLit 609 FM Export II Type Numbers Please let us know Designer Please let us…

BeoLab 7-2

BeoLab 7-2 Packed with advanced technology, BeoLab 7 is, quite simply, the most powerful stereo…

BeoVox RL 45

BeoVox RL 45 The idea behind Beovox Red Line speakers was one of flexibility. A…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 17

BeoLab 17 is a solid, impressive loudspeaker with
powerful sound that punches way beyond its actual size.
Its tight, striking geometry exudes character with myriad expressions. Featuring Immaculate Wireless Sound,
BeoLab 17 enables you to enjoy wireless music in
unsurpassed detail – while giving you freedom
and flexibility to open up exciting new options for your home dêcor.

SOUND

The little big wonder

Beolab 17 lets you enjoy wireless music in unsurpassed detail. With Adaptive Bass lineariation, the speaker automatically optimises its bass performance to the way you play your music. Room adaptation ensures harmonious sound no matter where you place your speakers.

DESIGN

A geometric work of art

The Beolab 17 speaker is designed with an innovative triangular body that opens a myriad of placements options. There is no dedicated top, bottom or sides on the cabinet. It all depends on the way you decide to use it.

PLACEMENT

Clear sound in all the right places

Hang it on your wall, place it on a shelf or choose between two different floor stands. The versatile placement options bring exciting new ways to living with beautiful music, regardless if you need a classic set of stereo speakers or speakers for your home theatre.

MATERIALS

A crafted frame for your music

This compact high-end speaker is made from a single piece of beautifully crafted aluminium. Unlike most other speakers, the fabric speaker cover is placed inside the aluminium body, which creates a circular frame for the colour of your choice.

BeoLab 17 Product Specifications

Type Number

Designer

Designers:
Torsten Valeur
David Lewis Designers

Manufactured

Colours

Fabric colours:

Forged Iron grey
Parisian night blue
Purple heart
Black
White

Aluminium Cabinet:

Natural
Brass tone
White
Black

End cap:

White
Black

Floor stand and floor base:

Natural
Black

Wall bracket:

Natural

Specification

Recommended Room Size

50 m²
500 ft²

Speaker Configuration

1 x 3/4″ tweeter
1 x 6″ woofer
High frequency driver: ¾” dome drivers with off-set placement behind the fabric front to give optimal performance regardless of how you turn the speaker

Amplifier

1 x 160 watt class D tweeter
1 x 160 watt class D woofer

Frequency Range

31 – 24,000 Hz

Maximum Loudness @1m (SPL)

106 dB SPL

Bass Capability

90 dB SPL

Advanced Sound Features

Adaptive Bass Linearization
Acoustic Placement Settings
Thermal Protection

CONNECTIVITY

Wi-Fi

Wireless Power Link (24 bit / 48 kHz)
WiSA (24 bit / 96 kHz)

Inputs an outputs

2 x Power Link (RJ45)
1 x RCA (L/R)
1 x Optical

In: Sample rate 32k, 44.1k, 48k, 96k/PCM16-24 bit
Out: Sample rate 48k/PCM 24 bit

Power supply

100-240V 50/60Hz mains cable

Weight

8.5 kg

Dimensions

On floor stand: 25 W x 71.9 H x 24.8 D cm
With wall bracket: – 0° 23.6 W x 32 H x 15 D cm
With wall bracket: – 20° 24.9 W x 32 H x 14.6 D cm
On floor base: 24.9 W x 71.9 H x 35 D cm
On end cap: 32 W x 25 H x 13.4 D cm

Upgrade your membership to view documents

Type	Language	Type
Data Sheet	EN	BeoLab 17 Data Sheet	View label
Service Manual	EN	BeoLab 17 Service Manual	View label

BeoCord 5500

BeoCord 5500 As part of Beosystem 5500, this advanced tape recorder was as close to…

BeoGram 2400

BeoGram 2400 Beogram 2200/2400 were identical except that, when coupled to the Beomaster 2400, Beogram…

BeoGram 6002

BeoGram 6002 This tangential-tracking record deck offered superb sound quality from records plus the assurance…

BeoLab 9

BeoLab 9 After much anticipation, Bang & Olufsen have released the BeoLab 9. This acoustic…

Posted on May 13, 2024May 13, 2024 by Multicare

BeoLab 12-3

Upgrade your membership to view documents

Type	Language	Type
Service Manual	EN	BeoLab 12-3 Service Manual	View label

BeoGram 2000

BeoGram 2000 This radial-tracking record deck had a lightweight turntable (only 400g) to minimise torque…

BeoSound A5

BeoSound A5 Powerful portable speaker Huge sound anywhere – in the home or outdoors. Beosound…

Beo6

Beo6 The Beo6 replaces the Beo5 and adds a wide screen which is touch sensitive…

BeoGram TX

BeoGram TX This was a re-badged Beogram 6002 but without the one way Datalink module.…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 11

The Beolab 11 is the new lower priced subwoofer, designed in particular to accompany the Beovision 10. It utilises a design principle seen in other subwoofers of having identical units firing in opposite directions and hence making the structure more stable. Indeed the B&W PV1 does just this using B&O ICE amplification.

B&O however have added a new twist to the equation by having the two 130mm drive units firing inwardly and so allowing the external casing to be made from the same polished aluminium seen in the Beovision 10.

Amplification is via a 250W ICE unit and so the speaker can be seen to fit below the Beolab 2 in the range.

Mounting Options

As a result of the balanced drive units, the Beolab 11 will be offered both as a floor standing model and with a wall bracket. This is again designed to match the Beovision 10. The Beovision 10 in both 40″ and 46″ versions is designed so that it can be used as a stand alone set but still utilise the subwoofer output.

This should add the lower frequencies not able to be produced due to the small speaker enclosure of the Beovision 10.

The Beolab 11 will stand just 320mm high on the floor stand. The cross over frequency and bass lift is set with a collection of switches on the base. There is a Powerlink connection and two Powerlink outputs so it can be used in a stereo system.

BeoLab 11 Product Specifications

Type Number

Designer

Designer: David Lewis

Manufactured

Manufactured: 2010 – ?

Colours

Colours: Polished Aluminium, White, Black, Dark Grey, Gold,

Specification

POWER AMPLIFIERS: 200W, Class D, ICEpower

EFFECTIVE FREQUENCY RANGE: Lower cut-off frequency (-10dB) = 33Hz

CABINET PRINCIPLE: 2 separate sealed boxes, Acoustic Balance principle

CABINET VOLUME: 2 x 2.5 litres

BASS DRIVER: 2 x 6.5 inch cone

FEATURES: Adaptive Bass Linearisation (ABL), Input Sensitivity switch, Room Adaptation switch, Thermal Protection

CONNECTIONS: 1 x PowerLink 8-pin DIN input, 2 x PowerLink 8-pin DIN outputs

ACCESSORIES: Wall Bracket, optional coloured covers

DIMENSIONS (W x H x D): 23.8 x 30.8 x 22.7cm (Floor) / 23.8 x 31.5 x 23.6cm (Wall)

WEIGHT: 7.3kg

Upgrade your membership to view documents

Type	Language	Type
User Guide	EN	BeoLab 11 User Guide	View label
Service Manual	EN	BeoLab 11 Service Manual	View label
Wall Bracket	EN	BeoLab 11 Wall Bracket	View label

BeoCord V3000

BeoCord V3000 Beocord V3000 was designed to match Beovision LS5500 in looks and budget in order to…

BeoCenter 3500

BeoCenter 3500 A combination system with the quality and specifications of “separates” Beocenter 3500 was…

BeoCord 6000

BeoCord 6000 Beocord 6000 measured 53cm wide x 13cm high (24,5cm with lid open) x…

BeoSound Level

BeoSound Level The Beosound Level wifi home speaker is our promise of designing future-proof products…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 9

After much anticipation, Bang & Olufsen have released the BeoLab 9. This acoustic lens speaker had been expected for some time, and it effectively replaces BeoLab 1 which was discontinued.

The design of BeoLab 9 continues B&O’s move away from elegant though easily imitated column loudspeakers to shorter, rounder forms with larger cabinet volumes and better potential for strong bass performance. B&O’s distinctive acoustic lens is also present, and the speakers’s height means that it is perfectly positioned at ear-level when the listener is seated.

The acoustic lens is cast from zinc and plated with matt chrome. Its prominent position gives the speaker a slightly hunched appearance – but B&O compare it to a lighthouse. The overall proportions are pleasing and there are some very nice details. For example, the power LED is concealed inside the acoustic lens, and the cooling fins/vents at the rear match the curve of the cabinet. The majority of the cabinet is fabric covered – black will probably be the most popular choice here, but it is also available in dark grey, blue and red.

There are three drivers: a 10” bass unit in an 18 litre enclosure, a 5” mid-range unit in a 4 litre enclosure and a 0.75” treble unit in the acoustic lens. All drivers are separately amplified, but there is only one ICEpower amplifier of 500W which drives the bass unit. The mid-range and treble units each have their own 100W analogue hybrid amplifier.

BeoLab 9 Product Specifications

Type Number

Designer

Designer: David Lewis

Manufactured

Manufactured: 2007 – ?

Colours

Colours: Black, Dark Grey, Blue, Red

Specification

Cabinet finish : Black cloth, aluminium
Power consumption 65W (IEC60065)
25W typical < 0,5W in standby
Power amplifier, bass 400W, 4 ohm, class D ICEpower
Power amplifier, midrange 100W, 6 ohm, class AB
Power amplifier, treble 100W, 8 ohm, class AB
Effective Frequency range 30 – 20.000 Hz
Crossover frequency 180/2000 Hz
Cabinet principle Closed box
Net volume, bass 18 litres
Net volume, midrange 4 litres
Magnetically shielded No. Must be placed > 50cm from picture
tube
Woofer 10″ / 250mm cone
Midrange 5″ / 125mm cone
Tweeter 3/4″ / 19mm dome in acoustic lens
Bass equalization ABL (Adaptive Bass Linearization)
Input sensitivity (Power Link) 125mV @ 91dB SPL
Input sensitivity (line) 125mV @ 91dB SPL
Switch off time (line) Automatic on /off (up to 3min)
Indicator On/Off LED placed in the acoustic lens
Operation Switch for Free standing – Against wall – In corner
Switch for Left – Right – Line (via PL plug)
Protection Thermal protection of all drivers.
ABL system protects the bass unit against mechanical damage.
Power supply Automatic voltage adaptation 100-120Vac or
190-240Vac

Upgrade your membership to view documents

Type	Language	Type
Review	DE	BeoLab 9 Stereoplay Review	View label
User Guide	EN	BeoLab 9 User Guide	View label
Setup Guide	NL	BeoLab 9 Setup Guide	View label
Service Manual	EN	BeoLab 9 Service Manual	View label
Service Manual	DK	BeoLab 9 Service Manual	View label

BeoCord 1101 (1975)

BeoCord 1101 (1975) The fact that the Beocord 1100 was equipped with Dolby B Noise Reduction system…

Celestial

Celestial All music. Zero clutter. Discreet in-ceiling speakers made for room-filling sound experiences. Exceptional sound…

BeoLit 500 (1965)

BeoLit 500 (1965) In the 1960’s, small, transistorised radios became extremely popular. This was a…

BeoPlay V1-40

BeoPlay V1-40 BeoPlay V1 – The new way to do tv BeoPlay V1 is made…

Posted on May 13, 2024June 2, 2024 by Multicare

BeoLab 7-1

Hi-fi television acoustics

Packed with advanced technology, BeoLab 7 is, quite simply, the most powerful stereo speaker ever developed for TV. With six individual driver units, all powered by their own digital ICEpower amplifier, BeoLab 7 delivers an unequalled sound performance for your TV viewing. The beam-shaped loudspeaker below the screen provides superb acoustic performance and signifies the presence of sound as an integral part of your viewing experience. Musically, the speaker rivals many hi-fi systems, and is quite capable of being used as a BeoLink speaker.

The natural fit

BeoLab 7 is specially developed for BeoVision 7 to contribute the ultimate stereo sound performance to the viewing experience. BeoLab 7-1 is the natural accompaniment for the BeoVision 7-32 LCD television, while the broader beam of BeoLab 7-2 is designed for BeoVision 7-40. In addition, BeoLab 7 stereo loudspeakers fit naturally under the BeoVision 4 plasma screen, or under a projection screen. In this application, the speaker can be either wall-mounted or placed on a special tabletop stand.

Colours to match

Long and lean, BeoLab 7-1 and BeoLab 7-2 look at home under a BeoVision 7 or BeoVision 4, or as part of a projection screen setup. The shorter BeoLab 7-1 is best suited for the BeoVision 7-32” screen. The loudspeaker cabinet is made from a single piece of aluminium and coated in a resilient black soft-touch lacquer. The perforated aluminium front grill now comes anodised in five different colours: Light and dark grey, blue, red and black.

A firm grip on powerful sound

A special three-way bass reflex construction incorporates six individual units – two each for treble, mid-range and bass. Each driver is powered by a unique built-in ICEpower amplifier, delivering a combined effect of 750 watt. In addition, BeoLab 7-1 and 7-2 are equipped with thermal protection circuits and Adaptive Bass Linearisation (ABL), which ensures maximum performance without distortion, even at very high volume. Bang & Olufsen has a quarter of a century of experience making loudspeaker cabinets from extruded aluminium. This technique allows for very rigid and compact enclosures with powerful sound performance.

Note that BeoLab 7-1 was designed to be used with the BV4-37 and BV4-42. The wider BeoLab 7-2 may be used with the larger-version BeoVision 4: BV4-50 and BV4-65.

Mounting Options

All four versions of BeoLab 7 were designed for incorporation with Bang & Olufsen’s motor stand options.

BeoLab 7-1 Product Specifications

Type Number

Type: 6210 (EU)
Type: 6212 (USA)

Designer

Designer: David Lewis

Manufactured

Manufactured: 2004 – ?

Colours

Colours: Black, Silver, Dark Grey, Red, Blue

Specification

Cabinet finish
Aluminium cabinet coated with hardwearing black soft-touch lacquer. Speaker grille in natural coloured anodised aluminium

Power consumption IEC65: 36 watt
Typical: 20 W
Stand-by: 0.2 W
Power amplifiers (per channel) 3 x 125 watts, Class D, ICEpowerÒ
Long-term maximum output power
per amplifier Bass: 120 watts/8 ohm
Midrange: 120 watts/8 ohm
Treble: 120 watts/8ohm
Effective Frequency range 37 – 20.000 Hz
Crossover frequencies 250 Hz and 4.000 Hz
Cabinet principle Bass: Bass reflex
Midrange/Treble: Closed box
Net volume, bass 4.2 litres (per side)
Net volume, midrange 0.8 litres (per side)
Magnetically shielded No
Woofer 101,6 mm
Midrange 76,2 mm
Tweeter 19 mm

Input sensitivity (Power Link) 88dB @ 125 mV SPL
Indicator (for service use only) 1 tri-colour LED. Green for On, Red for Off, Orange for Protection mode
Operation Free or Wall position
Protection Thermal protection

Connections:
Power Link 1 (Semi-Balanced PL cable type MK III, or fully mounted PL cable required)
Mains 1 input, 1 output (not US version)

Market specifications:
Type Market Voltage
6210 Australia, Austria, Bahrain, Belgium, China
Croatia, Czech Repub., Denmark, Egypt, Finland, France, Germany, Greece, Holland, Hong Kong, Hungary, Indonesia, Israel, Italy, Kuwait, Lebanon, Malaysia, Morocco, Norway, Oman, Poland, Portugal, Qatar, Russia, Saudi Arabia, Singapore, Slovak Rep., Slovenia, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, United Arab Emirates, United Kingdom
220 – 240V
6212 USA, Canada, Mexico, Taiwan 100 – 120 V
Optional Accessories:
Bracket for BeoLab7-1 Included
Wall bracket (Black) Type 2172 (1217266)

Upgrade your membership to view documents

Type	Language	Type
User Guide	EN	BeoLab 7-1 User Guide	View label
User Guide	NL	BeoLab 7-1 User Guide	View label
User Guide	EN	BeoLab 7-1 User Guide	View label
Service Manual	Multi	BeoLab 7-1 Service Manual	View label
Service Manual	EN	BeoLab 7-1 Service Manual	View label
Wall Bracket	EN	BeoLab 7-1 Wall Bracket	View label